For discussion of specific patterns or specific families of patterns, both newlydiscovered and wellknown.

MathAndCode
 Posts: 4351
 Joined: August 31st, 2020, 5:58 pm
Post
by MathAndCode » December 16th, 2020, 11:25 pm
goldenratio wrote: ↑December 16th, 2020, 10:56 pm
megasized_68h (final population 6867/6870) by apgoucher in G1, a new megasized record:
How can that region from Iwona be synthesized? My best guess is adding a dot spark to a blinker predecessor.
Code: Select all
x = 18, y = 22, rule = B3/S23
7bo$6bo$6b3o8$9b2o$9bobo$9bo5$16bo$15b2o$2o13bobo$b2o$o!
Also, the methuselah doesn't work with kill gliders enabled.
I have historically worked on conduits, but recently, I've been working on glider syntheses and investigating SnakeLife.

wwei23
Post
by wwei23 » December 21st, 2020, 9:49 pm
apgsearch is currently rolling the jackpot for the eater 2, but for now, have this.
Code: Select all
x = 45, y = 45, rule = LifeHistory
5.A$6.A$4.3A2$2.A$A.A$.2A8$32.2A$32.2A3$26.2A13.2A$26.2A13.2A2$21.2A$
21.2A2$24.2A$24.2A$18.2A$18.2A2$32.2A$32.2A2$14.2A13.2A$14.2A13.2A4$
37.2A4.2A$37.2A4.2A3$18.2A$18.2A$37.2A$37.2A!

goldenratio
 Posts: 288
 Joined: July 26th, 2020, 10:39 pm
Post
by goldenratio » December 23rd, 2020, 11:17 am
Hot on the heels of the megasized_68h, here's a megasized_70h (final population 7086/7090) which also produces a fourteener:
Code: Select all
x = 16, y = 16, rule = B3/S23
bbbbbbobbobooobo$
oooboobobobooobo$
oobooooboboooobo$
oooobbbobboobobo$
ooboobobobobobob$
oboobbbbooboobbb$
obobbbbbbboboobo$
bbbobboobobobobo$
bbboobobooboobob$
oobbobbobboooobo$
bbbbboooobooobob$
bbobbooooooobooo$
bobobbboobbbbbbo$
boboobbobooooboo$
oobobboboobbobbb$
oobooobbbooobbob!
It has a simple seed (block+beehive+blinker+glider+modified R)

yujh
 Posts: 2066
 Joined: February 27th, 2020, 11:23 pm
 Location: CHINA
Post
by yujh » January 3rd, 2021, 2:19 am
Yes, this is a new still life.
Code: Select all
x = 16, y = 16, rule = B3/S23
3obo5bo2bo$3b3o2b3o3b2o$2obobobo3b4o$2bo2b3obob3o$o2b3obobo3b3o$bob2o
3b6obo$2ob2o4b3o$4obo3bo2b4o$obobo2bobobobobo$2b4ob4o$o3b5o2b3o$2bobob
o3b3ob2o$2obo2b3o3bo$bo2b4ob2obo$bob4o3bob2obo$2o3b11o!
it’s pretty special for me.
https://catagolue.hatsya.com/attribute/ ... o/b3s23/C1

Ian07
 Posts: 679
 Joined: September 22nd, 2018, 8:48 am
Post
by Ian07 » January 9th, 2021, 8:26 pm
50093M. Beats the previous record by a relatively slim margin, but a new record nonetheless, and, of course, the first one to break 50k:
Code: Select all
x = 16, y = 16, rule = B3/S23
bbbobbbbboboobob$
bbbbbobbobbooboo$
bbooobbobobbbobb$
bobobbboboooobbo$
bbbobobobooooooo$
bbooboobooboobob$
boooobbbbbboobbb$
ooobooooboobbboo$
ooooboobbobbbbbb$
boboboobbobbbbbb$
oobboooobbboooob$
bboobobobbbobbbo$
bobbbboboboobobb$
booooboobboobbbo$
bbooobbbbobbobob$
oobobbbboobooobb!
Haul (Rob Liston, 20210109)

yujh
 Posts: 2066
 Joined: February 27th, 2020, 11:23 pm
 Location: CHINA
Post
by yujh » January 9th, 2021, 8:49 pm
Bump.
New p7 found by Calcyman ,20210109
Code: Select all
x = 16, y = 16, rule = B3/S23
obboooobbobooobb$
obobbooobbboobbo$
obobboooobbbbbbo$
oobboboboooobbob$
bbbboboboboobbbo$
oobbbbbbobobbboo$
bboobobbooobbooo$
booobobooooooobo$
bbobobbobbobbooo$
boooooobbbbboobb$
bobbboooobbboooo$
obbboobbooooobbo$
oboobooobbbboboo$
oobooobobbbobobb$
bbobbbooobbbooob$
bobbbbobbbboboob!
the oscillator forms at exactly gen 11.

MathAndCode
 Posts: 4351
 Joined: August 31st, 2020, 5:58 pm
Post
by MathAndCode » January 9th, 2021, 9:02 pm
yujh wrote: ↑January 9th, 2021, 8:49 pm
New p7 found by Calcyman
It's another natural burloaferimeter variant. Here is it shown alongside the version in the infobox on
the LifeWiki page:
Code: Select all
x = 26, y = 26, rule = B3/S23
5bo$4bobo$3bobobo$3bo3bo$2obo2b2ob2o$2obo4bobo$4b4o2$4b2o$4b2o11b2ob2o
$18bobo$18bo3bo$15b2obo2b4o$15b2obo6bo$19b6o2$21b2o$4b2ob2o12b2o$2bo2b
obo$2b2obo3bo$5bo2b4o$5bo6bo$6b5obo$11bo$8b3o$8bo!
Edit: Here's an overlaid version:
Code: Select all
x = 11, y = 10, rule = TripleB3S23
5.A$2.2FAFG$D2.G.G.A$2D.G3.G$2C.G2.2GFGA$2C.G4.A.G$4.4GFBD$9.D$4.2A2F
D$4.2AFB!
The two natural versions are more similar to each other than they are to the minimumpopulation version (evidenced by the relatively large number of blue and yellow cells compared to red and cyan cells or green and magenta cells), such as a section of the stator in the topright that resembles an aircraft carrier. This suggests that this type of structure is more likely to form naturally than alternative stators.
I have historically worked on conduits, but recently, I've been working on glider syntheses and investigating SnakeLife.

wwei23
Post
by wwei23 » January 9th, 2021, 9:28 pm
6:
Code: Select all
x = 16, y = 16, rule = B3/S23
3bo5bob2obo$5bo2bo2b2ob2o$2b3o2bobo3bo$3bo3bob4o2bo$3bobobob2ob4o$2b2o
b2ob2ob2obo$2b2o7b2o$4ob3ob2o3b2o$2o2b3o2bo$bobo2bo2bo$2o2b4o3b4o$2b2o
bobo3bo3bo$bo4bobob2obo$b4ob2o2b2o3bo$2b3o4bo2bobo$2obo4b2ob3o!

mniemiec
 Posts: 1262
 Joined: June 1st, 2013, 12:00 am
Post
by mniemiec » January 9th, 2021, 10:14 pm
yujh wrote: ↑January 9th, 2021, 8:49 pm
Bump. New p7 found by Calcyman ,20210109 ... the oscillator forms at exactly gen 11.
Nice! There are 65 29bit burloaferimiters, and this is one of the 35 without known syntheses.
The synthesis should be fairly easy, given how it forms. Here is an attempt that misses
the final step, although given the current state of Life engineering, it is likely to be possible:
Code: Select all
x = 161, y = 32, rule = B3/S23
9bo$7bobo$8boo$18bo$18bobo$18boo$$9bo$10boo$9boo$$18bo$19bo$17b3o$44b
3ob3o4bo38boo38b3o4bo$4bo36bo4bo3bo5bo17boo20bo12bo4boo15bo4bo5bo9boob
oo$5bo34b3ob3o3bo3b4o15b3o19bo14bobb3o14b3ob3o3b4o6bobbobo$3b3o7boo26b
obbo5bo5bo16bo3bo17bo15bobo3bo13bobbo7bo7boobobobo$12bobobboo25b3o3bo
4bo17bobob3o30bobbobob3o14b3o4bo11bobob3o$13bo3bobo53b3o4bo14bo17b3o4b
o32bo6bo$obo16bo56b3obo35b3obo33b5obo$boo16boo58bo39bo39bo$bo67bo6b3o
37b3o37b3o$68bo7bo39bo39bo$$12bo$12boo14boo$11bobo13boo$16boo11bo$bb3o
10boo$4bo12bo$3bo!

wwei23
Post
by wwei23 » January 9th, 2021, 10:24 pm
mniemiec wrote: ↑January 9th, 2021, 10:14 pm
Here is an attempt that misses
the final step, although given the current state of Life engineering, it is likely to be possible:
Why not just mutate the other burloaferimeter stator variant? It seems easier to me to start from there.

mniemiec
 Posts: 1262
 Joined: June 1st, 2013, 12:00 am
Post
by mniemiec » January 9th, 2021, 10:31 pm
mniemiec wrote: ↑January 9th, 2021, 10:14 pm
Here is an attempt that misses
the final step, although given the current state of Life engineering, it is likely to be possible:
wwei23 wrote: ↑January 9th, 2021, 10:24 pm
Why not just mutate the other burloaferimeter stator variant? It seems easier to me to start from there.
About half of them (all of the ones where the top is closed, i.e. with a tub) can be built that way, from one base. Unfortunately, I only know a synthesis for one of the simplest ones with an open top (plus another where the bottom block is moved). It's possible that several others could be made from that, but I haven't had the time to research it. That would probably be a good use for an automatic tool, e.g. the way Catagolue automatically finds syntheses using its converter library.

wwei23
Post
by wwei23 » January 9th, 2021, 10:34 pm
mniemiec wrote: ↑January 9th, 2021, 10:31 pm
About half of them (all of the ones where the top is closed, i.e. with a tub) can be built that way, from one base. Unfortunately, I only know a synthesis for one of the simplest ones with an open top (plus another where the bottom block is moved). It's possible that several others could be made from that, but I haven't had the time to research it. That would probably be a good use for an automatic tool, e.g. the way Catagolue automatically finds syntheses using its converter library.
True. But I think that you'd be worse off trying to synthesize an object based off of a soup that forms it at T=11.

MathAndCode
 Posts: 4351
 Joined: August 31st, 2020, 5:58 pm
Post
by MathAndCode » January 9th, 2021, 10:40 pm
mniemiec wrote: ↑January 9th, 2021, 10:14 pm
The synthesis should be fairly easy, given how it forms. Here is an attempt that misses
the final step, although given the current state of Life engineering, it is likely to be possible:
It feels like that common blinker predecessor should require fewer than five gliders, even with the constraints. Here's a way to create it from the correct direction using a loaf and P spark, each of which only requires four gliders:
Code: Select all
x = 4, y = 8, rule = B3/S23
2o$3o3$b2o$o2bo$obo$bo!
However, it turns out to not fit. Still, I suspect that a suitable three or fourglider synthesis exists.
wwei23 wrote: ↑January 9th, 2021, 10:34 pm
True. But I think that you'd be worse off trying to synthesize an object based off of a soup that forms it at T=11.
The formation boils down to a blinker, a wing sequence, a common blinker predecessor, and a couple of perturbations.
I have historically worked on conduits, but recently, I've been working on glider syntheses and investigating SnakeLife.

wwei23
Post
by wwei23 » January 9th, 2021, 10:45 pm
MathAndCode wrote: ↑January 9th, 2021, 10:40 pm
The formation boils down to a blinker, a wing sequence, a common blinker predecessor, and a couple of perturbations.
Right. But it seems that they have to be packed so closely together that to my eyes, it seems to be just plain impossible outside of lifecompetes! Goldtiger997 might think differently though,

MathAndCode
 Posts: 4351
 Joined: August 31st, 2020, 5:58 pm
Post
by MathAndCode » January 9th, 2021, 10:50 pm
wwei23 wrote: ↑January 9th, 2021, 10:45 pm
Right. But it seems that they have to be packed so closely together that to my eyes, it seems to be just plain impossible outside of lifecompetes! Goldtiger997 might think differently though,
I've seen that sort of thing happen thousands of generations (I think) in at least once. If you want, I can try to find the link.
I have historically worked on conduits, but recently, I've been working on glider syntheses and investigating SnakeLife.

goldenratio
 Posts: 288
 Joined: July 26th, 2020, 10:39 pm
Post
by goldenratio » January 13th, 2021, 5:52 pm
Another Hooks variant has appeared:
https://catagolue.hatsya.com/object/xp5 ... 6a8o/b3s23
Code: Select all
x = 16, y = 16, rule = B3/S23
bbooboboooooboob$
bobobbbobobboooo$
bboooboboboobobb$
bobobooboboobbbb$
ooooooobbobooboo$
bbbooobboobooobb$
oooboobbboobbboo$
boboooobbbbbbboo$
ooobbbboobobbboo$
booobobbbobobbbb$
obobbbbooobobooo$
obooboobbboobbob$
obbbboobboooobbo$
ooooobbbbooobobb$
bbbbbbobbbobboob$
ooooobbbbbobbboo!
This one involves an interaction that might be able to be turned into a component.

Extrementhusiast
 Posts: 1884
 Joined: June 16th, 2009, 11:24 pm
 Location: USA
Post
by Extrementhusiast » January 14th, 2021, 12:32 am
mniemiec wrote: ↑January 9th, 2021, 10:14 pm
yujh wrote: ↑January 9th, 2021, 8:49 pm
Bump. New p7 found by Calcyman ,20210109 ... the oscillator forms at exactly gen 11.
Nice! There are 65 29bit burloaferimiters, and this is one of the 35 without known syntheses.
The synthesis should be fairly easy, given how it forms. Here is an attempt that misses
the final step, although given the current state of Life engineering, it is likely to be possible:
These work:
Code: Select all
x = 36, y = 78, rule = B3/S23
14bo$7bo7b2o$5bobo6b2o11bobo$6b2o19b2o$28bo$17bo$15b2o$16b2o3$33bo$17b
2o14bobo$16bobo2b2o2b2o6b2o$17bo3bobo2bo$24b2o$20bo$20bo$20bo$bo$b2o$o
bo$10bo$10b2o6b2o$9bobo6bobo$18bo13b3o$5bo26bo$5b2o26bo$4bobo23$14bo$
15b2o$14b2o11bobo$27b2o$28bo3$7bo$8bo$6b3o$33bo$9b2o6b2o14bobo$9bobo4b
obo2b2o2b2o6b2o$9bo7bo3bobo2bo$24b2o$20bo$20bo$20bo2$b3o$3bo$2bo7bo$
10b2o6b2o$9bobo6bobo$18bo13b3o$5bo26bo$5b2o26bo$4bobo!
Possible slight improvement:
Code: Select all
x = 16, y = 11, rule = B3/S23
2b2o$2bobo3b2o$b4o4b2o$b2obo2bobo2b2o$4o4bo3bobo$14b2o$6b5o$5bo2b4o$5b
3o3bo$6b2o$6bo!
I Like My Heisenburps! (and others)

goldenratio
 Posts: 288
 Joined: July 26th, 2020, 10:39 pm
Post
by goldenratio » January 15th, 2021, 8:34 pm
Finally!
Code: Select all
x = 16, y = 16, rule = B3/S23
bbobbboobooobbbb$
bboobooobbbbbooo$
bobooobobbooobbb$
oobboobbbbbbooob$
bbbobobooboobboo$
obbooobbbboobboo$
bobobbobbooobobo$
boobobbbobboboob$
oobbobbbbbobbbob$
booboooboboooooo$
booobooooooooboo$
booobobbbobbbbbb$
ooobooooboooobbo$
oooboobobbbobbbo$
oooooobbobbbbooo$
oobooobobbbbobob!
This is the first new xs15 in a few months, I think.
Does anyone have a list of the twelve remaining xs15s?

wwei23
Post
by wwei23 » January 15th, 2021, 8:38 pm
Well, the xs15 is asymmetric. Sure, it showed up in a symmetric soup, but as far as I can tell, it might as well have been natural.

bubblegum
 Posts: 860
 Joined: August 25th, 2019, 11:59 pm
 Location: click here to do nothing
Post
by bubblegum » January 16th, 2021, 2:41 am
wwei23 wrote: ↑January 15th, 2021, 8:38 pm
Well, the xs15 is asymmetric. Sure, it showed up in a symmetric soup, but as far as I can tell, it might as well have been natural.
Would you care as to clarify on what you mean by this?
Each day is a hidden opportunity, a frozen waterfall that's waiting to be realised, and one that I'll probably be ignoring
sonata wrote:July 2nd, 2020, 8:33 pm
conwaylife signatures are amazing[
citation needed]
anything

dvgrn
 Moderator
 Posts: 7782
 Joined: May 17th, 2009, 11:00 pm
 Location: Madison, WI

Contact:
Post
by dvgrn » January 16th, 2021, 8:27 am
wwei23 wrote: ↑January 15th, 2021, 8:38 pm
Well, the xs15 is asymmetric. Sure, it showed up in a symmetric soup, but as far as I can tell, it might as well have been natural.
Heh, look at the post you're responding to again (not the quoted part). For this object there's no longer any need to dive in to those naturalvs.notquitenatural philosophical difficulties.

creeperman7002
 Posts: 257
 Joined: December 4th, 2018, 11:52 pm
Post
by creeperman7002 » January 17th, 2021, 3:48 pm
52513M(!) found yesterday by inspirehep:
Code: Select all
x = 16, y = 16, rule = B3/S23
ooobbooboboobooo$
oobobooobbbbobob$
bobbobbobobooobo$
bbobboobbbobbobb$
bbobbbbbobobbboo$
obbbboobbbooobob$
bbboobbobbobobbo$
bboooobobboboobb$
ooboobboobbbbboo$
oboooobobbbbooob$
obbboooobbooobbb$
boooooooooobbooo$
oobbbobooobobooo$
booboooooobbbobo$
obobbbbboooobobb$
oooboboboobbbbbo!
This lasts over 2400 generations longer than the previous record.
B2n3jn/S1c23y is an interesting rule. It has a replicator, a fake glider, an OMOS and SMOS, a wide variety of oscillators, and some signals. Also this rule is omniperiodic.
viewtopic.php?f=11&t=4856

MathAndCode
 Posts: 4351
 Joined: August 31st, 2020, 5:58 pm
Post
by MathAndCode » January 17th, 2021, 4:49 pm
creeperman7002 wrote: ↑January 17th, 2021, 3:48 pm
52513M(!) found yesterday by inspirehep:
Here's a version with a population of only 32:
Code: Select all
x = 8, y = 34, rule = B3/S23
4b2o$5bo$2bobo$2bo10$4bobo$5bo$5bo5$b2o$b2o5$4b2o$4bobo$o6bo$bo2bo2bo
$2bo4bo$o5bo$bo3bo$2b3o!
Further population reductions likely are possible.
I have historically worked on conduits, but recently, I've been working on glider syntheses and investigating SnakeLife.

goldenratio
 Posts: 288
 Joined: July 26th, 2020, 10:39 pm
Post
by goldenratio » January 17th, 2021, 4:55 pm
MathAndCode wrote: ↑January 17th, 2021, 4:49 pm
Here's a version with a population of only 32:
Code: Select all
x = 8, y = 34, rule = B3/S23
4b2o$5bo$2bobo$2bo10$4bobo$5bo$5bo5$b2o$b2o5$4b2o$4bobo$o6bo$bo2bo2bo
$2bo4bo$o5bo$bo3bo$2b3o!
Further population reductions likely are possible.
Calcyman posted this population 27 52444M on the Discord:
Code: Select all
x = 19, y = 37, rule = B3/S23
11bo$10bob2o$9b2o11$11bobo$12bo$12bo10$15bo$13b2o$8b2o4bo$9b2o$10bo6bo
$17b2o4$bo$b2o$obo!
Probably minimal, unless there's some <10 cell edgy enough loaf predecessor that times just right.

MathAndCode
 Posts: 4351
 Joined: August 31st, 2020, 5:58 pm
Post
by MathAndCode » January 17th, 2021, 4:59 pm
goldenratio wrote: ↑January 17th, 2021, 4:55 pm
Calcyman posted this population 27 52444M on the Discord:
Code: Select all
x = 19, y = 37, rule = B3/S23
11bo$10bob2o$9b2o11$11bobo$12bo$12bo10$15bo$13b2o$8b2o4bo$9b2o$10bo6bo
$17b2o4$bo$b2o$obo!
Probably minimal, unless there's some <10 cell edgy enough loaf predecessor that times just right.
I independently found this, which lasts for slightly longer:
Code: Select all
x = 19, y = 38, rule = B3/S23
11b2o$12bo$10bo$8bobo10$11bobo$12bo$12bo9$15bo$15b2o$9bo4bo$9bo$9b3o$
17b2o$17bo5$bo$b2o$obo!
I have historically worked on conduits, but recently, I've been working on glider syntheses and investigating SnakeLife.