Thread for basic questions
Re: Thread for basic questions
A bit late, but here's a database dump of 7808 unique P2 rotors. (if I did the SQL query correctly...) Some are huge and redundant.One line per object, tab delimited with Hickerman's rotor descriptor, wcode and rle.
 Attachments

 P2rotors.txt.zip
 (702.7 KiB) Downloaded 30 times
Re: Thread for basic questions
With the help of sed and awk and some rle conversion scripts, I ran this through my program. These are the only missing windows up to rotations, and obviously two are equivalent to the others.
Code: Select all
* O * O * o * o
O * O o o * o O
Code: Select all
x = 9, y = 17, rule = Life
b2o3b2o$b2o4bo$3b2o$b2obobo$5b2obo$2o2b2obo$2bobo2bo$4bo$3b2obo$2b2o$b
obobobo$o3b3obo$obo3bobo$bob2o2bo$3b2o$2bo3bo$2b2ob2o!
Code: Select all
. * > * .
* * . .
Re: Thread for basic questions
I suppose my previous post was missed with the page change, but to reiterate, one of these is possible:pcallahan wrote: ↑January 22nd, 2020, 2:08 amThese are the only missing windows up to rotations, and obviously two are equivalent to the others.Code: Select all
* O * O * o * o O * O o o * o O
Code: Select all
x = 14, y = 12, rule = LifeHistory
4.A$2A.A.A$A.2A.A$4.A.2A$.3A.A2.A$.A2.A.CD.A$4.A.DC.A2.A$5.A2.A.3A$6.
2A.A$8.A.2A.A$8.A.A.2A$9.A!
Matthias Merzenich
Re: Thread for basic questions
Oops. You're right. I missed it.Sokwe wrote: ↑January 22nd, 2020, 2:38 amI suppose my previous post was missed with the page change, but to reiterate, one of these is possible:
Re: Thread for basic questions
It's unclear if this is at all practical, but here are 70 tiles for period2 patterns, treating rotations as equivalent but without eliminating any. White and dark gray squares are stable dead and live cells respectively, while the red and blue cells are alternating. There are no jigsaw contours, but they could be added with better graphics. Each red cell is counted with blue markings and vice versa to indicate the color of the successor cell.
One thing to consider about placing these tiles by hand is that often the next tile has to match two adjacent tiles. In that case, there are only four tiles that will match. That doesn't make it easy to grab those tiles at random, but in some alternate universe where we didn't have computers, I suspect a filing system could be devised to narrow down the choices. Maybe just arrange them in a 16x16 matrix corresponding to tiles with duplicates, counting different rotations as distinct. A stable dead cell must never have exactly three marks of the same color. A stable live cell must have two or three marks of each color. An alternating cell must have three marks of its own color, but must not have two or three marks of the opposite color.
Here are the blinker and toad shown with these markings. I didn't draw this by hand! Here's a python program using turtle graphics. Not my best programming effort, but I mainly wanted to see the results.
Here's a repl.it link. I do not know why bgcolor doesn't work. https://repl.it/repls/CalmPleasantTriggers
One thing to consider about placing these tiles by hand is that often the next tile has to match two adjacent tiles. In that case, there are only four tiles that will match. That doesn't make it easy to grab those tiles at random, but in some alternate universe where we didn't have computers, I suspect a filing system could be devised to narrow down the choices. Maybe just arrange them in a 16x16 matrix corresponding to tiles with duplicates, counting different rotations as distinct. A stable dead cell must never have exactly three marks of the same color. A stable live cell must have two or three marks of each color. An alternating cell must have three marks of its own color, but must not have two or three marks of the opposite color.
Here are the blinker and toad shown with these markings. I didn't draw this by hand! Here's a python program using turtle graphics. Not my best programming effort, but I mainly wanted to see the results.
Code: Select all
import math
import turtle
def polygon(r, n, color):
turn = 360.0 / n
edge = 2 * r * math.sin(math.radians(turn / 2.0))
turtle.penup()
turtle.backward(r)
turtle.pendown()
turtle.fillcolor(color)
turtle.begin_fill()
turtle.left(90  turn/2.0)
for i in range(n):
turtle.forward(edge)
turtle.right(turn)
turtle.end_fill()
turtle.penup()
turtle.right(90  turn/2.0)
turtle.forward(r)
def quadrant(side, color):
turtle.penup()
turtle.fillcolor(color)
turtle.begin_fill()
for i in range(4):
turtle.forward(side)
turtle.right(90)
turtle.end_fill()
def dots(side, color, rotate=0, size=0.08):
stem = side * 0.6
old_width = turtle.width()
turtle.width(2)
turtle.penup()
turtle.forward(side)
turtle.left(90)
turtle.forward(side)
turtle.right(202.5 + rotate)
turtle.pendown()
turtle.pencolor(color)
turtle.forward(stem)
turtle.penup()
polygon(side * size, 6, color)
turtle.backward(stem)
turtle.left(202.5 + rotate)
turtle.backward(side)
turtle.right(90)
turtle.backward(side)
turtle.right(180)
turtle.forward(side)
turtle.right(90)
turtle.forward(side)
turtle.left(202.5  rotate)
turtle.pendown()
turtle.pencolor(color)
turtle.forward(stem)
turtle.penup()
polygon(side * size, 6, color)
turtle.backward(stem)
turtle.right(202.5  rotate)
turtle.backward(side)
turtle.left(90)
turtle.backward(side)
turtle.right(180)
turtle.width(old_width)
def border(side, color):
turtle.penup()
turtle.forward(side)
turtle.right(90)
turtle.pencolor(color)
turtle.pendown()
for i in range(4):
turtle.forward(side)
turtle.right(90)
turtle.forward(side)
turtle.left(90)
turtle.penup()
turtle.backward(side)
colors = ["white", "#ff7070", "#7070ff", "#606860"]
evencolor = "#0000b0"
oddcolor = "#b00000"
def tile(states, side=50):
for state in states:
quadrant(side, colors[state])
turtle.right(90)
border(side, "gray")
turtle.hideturtle()
for state in states:
if state & 1:
dots(side, evencolor, 11.25)
if state & 2:
dots(side, oddcolor, 11.25)
turtle.right(90)
def pattern(grid, x, y):
for i in range(len(grid)  1):
for j in range(len(grid[i])  1):
turtle.setposition(50 * j + x, y  50 * i)
tile([grid[i+1][j+1], grid[i+1][j], grid[i][j], grid[i][j+1]], 25)
turtle.bgcolor("#559883")
turtle.tracer(0, 0)
turtle.hideturtle()
turtle.speed(0)
row = 0
col = 0
for ix in range(256):
states = [(ix >> i * 2) & 3 for i in range(4)]
if states == min([states[i:] + states[:i] for i in range(4)]):
turtle.penup()
turtle.setposition(70 * col  350, 350  70 * row)
tile(states, 25)
col += 1
if col >= 10:
col = 0
row += 1
blinker = [
[0, 0, 0, 0, 0],
[0, 0, 1, 0, 0],
[0, 2, 3, 2, 0],
[0, 0, 1, 0, 0],
[0, 0, 0, 0, 0]]
pattern(blinker, 350, 150)
toad = [
[0, 0, 0, 0, 0, 0],
[0, 0, 2, 0, 0, 0],
[0, 3, 1, 1, 2, 0],
[0, 2, 1, 1, 3, 0],
[0, 0, 0, 2, 0, 0],
[0, 0, 0, 0, 0, 0]]
pattern(toad, 100, 150)
turtle.update()
Re: Thread for basic questions
I like those tiles. Now you’ve given me another project to consume my time— make a application that allows for the manipulation of these tiles, as some sort of puzzle. Would be interesting to have the matrix displayed showing all the currently legal tiles that can be placed, or have an semiauto random completion mode. (Hit the button and the app would place 5 tiles at random, then allow the user another choice.)
Would be interesting to even treat it as a game, competative or solo — you get points for building oscillators. Some sort of scoring based on rotor size, tile rarity, etc.
Speaking of which, do you have any stats on how common the various tiles are?
Would be interesting to even treat it as a game, competative or solo — you get points for building oscillators. Some sort of scoring based on rotor size, tile rarity, etc.
Speaking of which, do you have any stats on how common the various tiles are?
Re: Thread for basic questions
I am thinking about it as a game or puzzle, but it seems like it may be a game for masochists. I'd need a bunch to play with (and of course you could integrate it into an app as you suggest to make it less onerous). I find the still life tiles more tractable. I am pretty sure that having six tiles, a human being could get very good at placing them fast.
I can easily modify my script to compile some statistics (e.g. based on the set of oscillators you posted), but I'll need to take a second look at it. I need to handle rotations without doublecounting.
Update: Here's a bigger example. While I can spot check individual cells, I don't think violations would jump right out at me. Update 2: Here are the statistics on tiles found in the P2 rotor set, listed in order of frequency. I believe this is accurate, but I welcome verification. There are 66 tiles represented with rotationally equivalent tiles grouped together. Cells are given in clockwise order around the tile (i.e., not row by row). .=dead, *=live, o=alternating, O=alternating the other way.
Code: Select all
1063967 ....
150187 .O.o
104584 ...o
101497 ...O
92723 **..
75694 *...
52666 ..oO
52378 ..Oo
33301 ***.
24621 *.o.
22519 *.O.
18517 *.*.
16564 .oOO
14901 *o.O
14239 .Ooo
13874 *O.o
12639 OOoo
12367 *.Oo
12283 *Oo.
11531 *.oO
10709 .OOo
9942 *oO.
9675 .ooO
8216 *o..
6930 *O..
6881 *..O
6733 *..o
2365 ..OO
2257 ..oo
1013 **o.
999 **.o
844 .o.o
684 **O.
656 ***o
609 **.O
468 ****
441 OoOo
410 *.*o
379 .O.O
376 .oOo
361 *OO.
359 .OoO
344 *.oo
343 *oo.
276 *.OO
273 oooo
263 *Ooo
223 .ooo
216 OOOO
197 *ooO
191 .OOO
191 *OOo
189 *.*O
182 ***O
176 *O.O
159 *o.o
147 *oOO
129 **oo
106 *O*o
80 *OOO
78 **OO
67 *ooo
16 Oooo
3 **oO
3 **Oo
1 OOOo
Note: alternatively, you can squint and see a blue branching object with 4 nodes and a red one with 5 nodes. A better use of colors or shapes might make this stand out more.
Update 4: There's no reason the color of the strokes has to correspond directly to the cells they count. It occurred to me that there could be a single color (e.g. green) corresponding to a neighbor of an alternating (red or blue) cell that is live in the opposite generation. Then instead of looking for red triples in red cells and blue triples in blue cells, you'd just look for green triples. Green strokes not grouped as three would be an automatic violation, and that would be easy to spot. I think that would help a little, but it is probably the always dead cells that are little too busy for checking their crowding condition. It would be useful to try a lot of different color schemes and see what is easier to identify.
Re: Thread for basic questions
New post so I can add three new images. This is a different coloring that simplifies the rules a bit on alternating cells. Whether the alternating cell is red or blue, there must always be 3 white strokes and must never be 2 or 3 black strokes. I'm not sure if helps that much visually, but it might be a little easier to explain the constraints to someone with no previous knowledge of Life. All the tiles:
Blinker and toad.
A period2 oscillator.
Update: Here is a tile frequency count for the big oscillator (I have only spot checked for accuracy but it seems right).
Code: Select all
38 ....
24 *...
14 **..
7 *O..
7 *.o.
7 *.O.
7 *..o
6 ..oO
6 ...o
6 ...O
6 *.*.
5 *oo.
5 *.OO
4 .O.o
4 *o.O
2 ..Oo
2 *o..
2 *Oo.
2 *.Oo
2 *..O
2 **O.
2 **.o
2 ***.
1 Oooo
1 OOOo
1 .ooo
1 .o.o
1 .OOO
1 .O.O
1 ..oo
1 ..OO
1 *OO.
1 *.oo
1 *.*o
1 *.*O
1 **oo
1 **o.
1 **OO
1 **.O
1 ***o
1 ***O
Last edited by pcallahan on January 23rd, 2020, 12:47 pm, edited 1 time in total.
 Hdjensofjfnen
 Posts: 1520
 Joined: March 15th, 2016, 6:41 pm
 Location: r cis θ
Re: Thread for basic questions
Does this oscillator have a name? It seems like it should; the rotor is unique:
Code: Select all
x = 7, y = 14, rule = B3/S23
3bo$2bobo$2bobo$b2ob2o$4bo$4bo$o4b2o$2o4bo$2bo$2bo$b2ob2o$2bobo$2bobo
$3bo!
"A man said to the universe:
'Sir, I exist!'
'However,' replied the universe,
'The fact has not created in me
A sense of obligation.'" Stephen Crane
'Sir, I exist!'
'However,' replied the universe,
'The fact has not created in me
A sense of obligation.'" Stephen Crane
Code: Select all
x = 7, y = 5, rule = B3/S2i3y4i
4b3o$6bo$o3b3o$2o$bo!
Re: Thread for basic questions
Where did all of the patterns went?
https://web.archive.org/web/20150422152 ... /b368s245/
Is there anyone here that still have those patterns?
https://web.archive.org/web/20150422152 ... /b368s245/
Is there anyone here that still have those patterns?
A 13 year old guy that have useless discoveries about life and other rules.
Code: Select all
x = 13, y = 20, rule = B3/S23
11b2o$11b2o4$8b2o$8b2o2$2o$2o3$3b2o$3b2o2$11b2o$10b2o$12bo$3b2o$3b2o!
Re: Thread for basic questions
AforAmpere posted a copy of David Eppstein's glider database to Discord recently.JP21 wrote: ↑January 25th, 2020, 1:51 amhttps://web.archive.org/web/20150422152 ... /b368s245/
Is there anyone here that still have those patterns?
glider.c:
Code: Select all
/*
** glider  output some known gliders for given totalistic lifelike ca rules
** David Eppstein, UC Irvine, 5 Mar 1998
**
** Note this doesn't search for gliders, it just outputs ones already
** found by other programs. My searches for gliders to list here have
** not been thorough  if one rule has more gliders than another, it
** may mean that it's easier to find gliders for it, but it also may
** merely mean that I used more powerful search tools on it. For the
** same reason, the profusion of high speed, low period gliders is not
** so much because such gliders are more likely to exist (I don't think
** they are) but because they're much easier to find.
**
** The output is in "run length encoded" format  empty cells are
** indicated by "b", full cells by "o", line breaks by "$", and multiple
** copies of any of these characters can be indicated by prefacing them
** with a decimal number (for instance "4b" is short for "bbbb").
**
** A "glider" is a pattern (in a cellular automaton) that stays bounded
** in size but that is unbounded in location. Any glider must form a
** pattern that repeats periodically, at each repetition moving a
** certain distance horizontally and/or vertically. That distance
** divided by the period is known as the "speed" of the glider, and must
** be a rational number. We call a speed of one unit of distance per
** time step "c" because that's the fastest speed any object (or
** information) can travel in a cellular automaton (at least, with the
** 8unit neighborhood used here).
**
** The automata considered here are "totalistic"  what each cell does
** depends only on the number of full cells among its eight nearest
** neighbors. For instance in the most famous of these automata,
** "Life", a cell changes from empty to full if it has three full
** neighbors and stays full if it has two or three full neighbors. We
** indicate this by a code of the form "Bxx/Sxx" where the xx's are
** digits from 0 to 8; a digit in the B section indicates a number of
** neighbors causing a cell to be born (change from empty to full) and a
** digit in the S section indicates a number of neighbors causing a cell
** to survive (stay full). The code for Life is B3/S23.
*/
#include <stdio.h>
#include <stdlib.h>
#ifndef GLIDERDB
#define GLIDERDB "glider.db"
#endif
#define MAX_GDB_LINE_LENGTH 1000000
#define MAX_RLE_LINE_LENGTH 72
/* HACK TO MAKE WORK WITH MAC LINE TERMINATION! */
int my_fgets(char * buf, int BUFLEN, FILE * f) {
int n = 0; int c;
while (n < BUFLEN  1 && (c = fgetc(f)) != EOF) {
if (c == '\r') c = '\n';
buf[n++] = c;
if (c == '\n') break;
}
buf[n] = 0;
return n;
}
#define fgets my_fgets
enum { by_num, by_size, by_period, by_vel } map_type = by_num;
typedef unsigned long rule;
struct Glider {
rule zeros, ones; /* bits that must be zero or one in CA rule spec */
short x, y;
short period, dx, dy;
short halfPeriod;
char *rle; /* what to output if spec matches */
char *name;
char *disco;
struct Glider * next;
};
struct Glider *firstGlider = 0;
struct Glider *lastGlider = 0;
int numGliders = 0;
void printRule(rule r) {
int i;
printf("B");
for (i = 0; i < 9; i++) if (r & (1 << (9+i))) putchar(i+'0');
printf("/S");
for (i = 0; i < 9; i++) if (r & (1 << i)) putchar(i+'0');
}
/* encode sets of rules (input as bitvectors of forced ones and forced zeros in rule codes)
as single 32bit words, such that set can be compared for specificity:
if one set is a subset of another, then the bits of the encoding of one will be a
subset of the bits of the encoding of the other.
The obvious way to do this would be to make a single bitvector of the forced ones and zeros,
but this would have 36 bits and not fit in a single word. Instead, we use a tricky encoding,
where exactly two of the top four bits are on, and specify which type of rule set we are
looking at: B0, B01, B01/S7, B2, B3, or B23. It is assumed that all gliders match exactly
one of these six possibilities (actually, we don't know any B23 gliders). The remaining 28
bits of the encoding specify the remaining forced ones and zeros of the rule. */
#define PACKZB(bits) (((bits&0774000)>>4)  (bits & 0177))
#define PACKZ(code,ones,zeros) ((code<<28)  (PACKZB(ones)<<14)  PACKZB(zeros))
#define PACKNB(bits) (((bits&0760000)>>4)  (bits & 0777))
#define PACKN(code,ones,zeros) ((code<<28)  (PACKNB(ones)<<14)  PACKNB(zeros))
rule packRule(rule ones, rule zeros) {
if (((zeros  ones) & 03600) == 03600) { /* all of B01/S78 fixed */
if ((ones & 03600) == 01000) return PACKZ(0x3,ones,zeros); /* B0 */
if ((ones & 03600) == 03000) return PACKZ(0x5,ones,zeros); /* B01 */
if ((ones & 03600) == 03200) return PACKZ(0x6,ones,zeros); /* B01/S7 */
}
if (((zeros  ones) & 017000) == 017000) { /* all of B0123 fixed */
if ((ones & 017000) == 04000) return PACKN(0x9,ones,zeros); /* B2 */
if ((ones & 017000) == 010000) return PACKN(0xa,ones,zeros); /* B3 */
if ((ones & 017000) == 014000) return PACKN(0xc,ones,zeros); /* B23 */
}
fprintf(stderr,"packRule: unexpected input, ones=0%o, zeros=0%o\n",ones,zeros);
exit(1);
}
#define UNPACKZ(x) x = (((x & 037600)<<4)  (x & 0177))
#define UNPACKN(x) x = (((x & 037000)<<4)  (x & 0777))
void badPackCode(rule packedRule) {
fprintf(stderr, "bad code 0x%x for packed rule %o\n",((packedRule>28)&0xf),packedRule);
exit(1);
}
void putRule(rule packedRule) {
rule ones = (packedRule>>14)&037777;
rule zeros = packedRule&037777;
int code = (packedRule>>28) & 0xf;
int j;
if (code & 8) { /* B2,B3,B23 */
UNPACKN(ones);
UNPACKN(zeros);
if (code == 0x9) { ones = 04000; zeros = 013000; }
else if (code == 0xa) { ones = 010000; zeros = 07000; }
else if (code == 0xc) { ones = 014000; zeros = 03000; }
else badPackCode(packedRule);
} else {
UNPACKZ(ones);
UNPACKZ(zeros);
if (code == 0x3) { ones = 01000; zeros = 02600; }
else if (code == 0x5) { ones = 03000; zeros = 00600; }
else if (code == 0x6) { ones = 03200; zeros = 00400; }
else badPackCode(packedRule);
}
for (j = 0; j < 9; j++) {
rule b = 1 << (j+9);
if (zeros & b) putchar('');
else if (ones & b) putchar('X');
else putchar(' ');
}
printf(" ");
for (j = 0; j < 9; j++) {
rule s = 1 << j;
if (zeros & s) putchar('');
else if (ones & s) putchar('X');
else putchar(' ');
}
printf("\n");
}
int gcd(int a, int b) {
if (a < 0) return gcd(a,b);
else if (b < 0) return gcd(a,b);
else if (b == 0) return a;
else return gcd(b,a%b);
}
void printGlider(struct Glider * g, int gn, rule r) {
char * s = g>rle;
int maxd, factor;
if (g>name) printf("#C The %s (glider %d), ", g>name, gn);
else printf("#C Glider %d, ", gn);
maxd = g>dx;
if (g>dy > g>dx) maxd = g>dy;
factor = gcd(maxd,g>period);
if (maxd/factor > 1) printf("%d", maxd/factor);
printf("c/%d ", g>period/factor);
if (g>dx == g>dy) printf("diagonal");
else if (g>dx == 0  g>dy == 0) printf("orthogonal");
else {
int mind = g>dx, slopefactor;
if (g>dy < g>dx) mind = g>dy;
slopefactor = gcd(mind,maxd);
if (mind == slopefactor) printf("slope %d", maxd/mind);
else printf("slope %d/%d", maxd/slopefactor, mind/slopefactor);
}
if (g>halfPeriod) printf(" (period %d/2)\n", g>period);
else if (factor > 1) printf(" (period %d)\n", g>period);
else putchar('\n');
if (g>disco) printf("#C Discovered by %s\n", g>disco);
printf("#C\n#C B012345678 S012345678\n#C ");
putRule(packRule(g>ones,g>zeros));
printf("#C\nx = %d, y = %d, rule = ", g>x, g>y);
printRule(r);
/* now break RLE stuff into managable sized lines */
while (strlen(s) > MAX_RLE_LINE_LENGTH) {
int i;
char * t = s + MAX_RLE_LINE_LENGTH;
while (isdigit(*(t1))) t;
putchar('\n');
for (i = 0; i < ts; i++) putchar(s[i]);
s = t;
}
printf("\n%s\n", s);
}
void nthGlider(int n) {
int i = n;
struct Glider * g = firstGlider;
if (i <= 0  i > numGliders) {
fprintf(stderr,"only %d gliders are known\n", numGliders);
exit(1);
}
while (i > 0) g = g>next;
printGlider(g, n, g>ones);
exit(0);
}
/* is rule off by one from more general pattern? if so return that one bit */
rule offByOne(rule r, rule pat) {
rule x = pat &~ r;
if (x & (x1)) return 0; /* more than one bit off */
return ((x << 16)  (x >> 16)) & r;
}
rule * ruleList = 0;
int ruleListLength = 0;
void addRule(rule r) {
int i = 0;
rule b;
if (ruleList == 0) {
ruleList = malloc(numGliders * sizeof(rule));
if (ruleList == 0) {
printf("Out of memory for ruleList!\n");
exit(0);
}
}
while (i < ruleListLength) {
if ((ruleList[i] &~ r) == 0) return; /* too specific, ignore */
else if ((ruleList[i] & r) == r) /* more general, del more specific rule */
ruleList[i] = ruleList[ruleListLength];
else if ((b = offByOne(r,ruleList[i])) != 0) {
r &=~ b; /* generalize rule */
i = 0;
} else if ((b = offByOne(ruleList[i],r)) != 0) { /* generalize other way */
b = ruleList[i] &~ b; /* find more general rule */
ruleList[i] = ruleList[ruleListLength]; /* remove specific */
addRule(b); /* add back in as more general */
i = 0; /* go back to the rule we started with */
} else i++;
}
ruleList[ruleListLength++] = r;
}
#define gray(r) ((r) ^ ((r) >> 1))
inline rule unGray(rule r) {
r ^= r>>1;
r ^= r>>2;
r ^= r>>4;
r ^= r>>8;
r ^= r>>16;
return r;
}
int compareRules(const void * p, const void * q)
{
rule pr = unGray(*(rule *)p);
rule qr = unGray(*(rule *)q);
if (pr<qr) return 1;
else if (pr>qr) return 1;
else return 0;
}
int matchNum = 0;
int matchDen = 0;
char matchDir = 0;
int fastDiag = 0;
int speedLimit = 0;
int gliderMatch(char * pattern, struct Glider *g) {
char gDir;
int maxd, div;
if (pattern == 0) return 1; /* trivial pattern */
if (matchDir == 0) {
/* parse pattern to set up match parameters */
if (*pattern == 'p'  *pattern == 'P') {
map_type = by_period;
pattern++;
} else if (*pattern == 's'  *pattern == 'S') {
map_type = by_size;
pattern++;
} else if (*pattern == 'n'  *pattern == 'N') {
map_type = by_num;
pattern++;
} else if (*pattern == 'v'  *pattern == 'V') {
map_type = by_vel;
pattern++;
}
while (*pattern >= '0' && *pattern <= '9') {
matchNum = matchNum * 10 + (*pattern  '0');
pattern++;
}
if (*pattern == 'c') {
if (matchNum <= 0) matchNum = 1;
pattern++;
}
if (*pattern == '/') pattern++;
while (*pattern >= '0' && *pattern <= '9') {
matchDen = matchDen * 10 + (*pattern  '0');
pattern++;
}
while (*pattern == ' ') pattern++;
if (*pattern != '\0') matchDir = *pattern;
else matchDir = '*';
}
if (matchDir == 'd' && matchDen > 0 && matchDen < matchNum*4) fastDiag = 1;
if (matchDen > 0 && (matchDen <= matchNum*2  (matchDir == 'd' && matchDen <= matchNum*3)))
speedLimit = 1;
if (g == 0) return 1; /* test call to get pattern set up */
if (g>dx == g>dy) gDir = 'd'; /* diagonal */
else if (g>dx == 0  g>dy == 0) gDir = 'o'; /* orthogonal */
else gDir = 'k'; /* knight's move and other slopes */
if (matchDir != gDir && matchDir != '*') return 0;
maxd = g>dx;
if (g>dy > g>dx) maxd = g>dy;
div = gcd(maxd,g>period);
if (matchNum > 0 && matchNum != maxd/div) return 0;
if (matchDen > 0 && matchDen != g>period/div) return 0;
return 1;
}
void listRules(char * dir) {
int i;
struct Glider * g;
if (dir == 0)
printf("Totalistic rules for which gliders are known:\n\n");
else
printf("Totalistic rules for which %s gliders are known:\n\n", dir);
printf(" B012345678 S012345678\n");
for (g = firstGlider; g != 0; g = g>next)
if (gliderMatch(dir,g))
addRule(packRule(g>ones, g>zeros));
qsort(ruleList,ruleListLength,sizeof(rule),compareRules);
for (i = 0; i < ruleListLength; i++) {
printf(" ");
putRule(ruleList[i]);
}
exit(0);
}
/* find redundant gliders */
#define SUBSETQ(x,y) ((x&y) == x)
void printStats(struct Glider * g) {
printf("%dx%d %d,%dc/%d ", g>x, g>y, g>dx, g>dy, g>period);
printRule(g>ones);
printf("  ");
printRule(g>ones ~ g>zeros);
printf("\n");
}
void redundant() {
struct Glider *g, *gg;
int gn, ggn;
int foundAny = 0;
for (g = firstGlider, gn = 1; g != 0; g = g>next, gn++) {
for (gg = firstGlider, ggn = 1; gg != 0; gg = gg>next, ggn++) {
int ghp = (g>halfPeriod? 2 : 1);
int gghp = (gg>halfPeriod? 2 : 1);
if (SUBSETQ(gg>ones,g>ones) &&
SUBSETQ(gg>zeros,g>zeros) &&
g != gg && g>period/ghp == gg>period/gghp &&
((g>dx/ghp == gg>dx/gghp && g>dy/ghp == gg>dy/gghp) 
(g>dx/ghp == gg>dy/gghp && g>dy/ghp == gg>dx/gghp)) &&
(gg>ones != g>ones  gg>zeros != g>zeros  ggn<gn))
{
printf("\nGlider %d is made redundant by glider %d.\n", gn, ggn);
printStats(gg); printStats(g);
foundAny = 1;
break; /* escape inner loop */
}
}
}
if (!foundAny) printf("No redundant gliders.\n");
exit(0);
}
int reverse(int i) {
int j;
int result = 0;
for (j = 0; j <= 8; j++)
if (i & (1<<j)) result = 1 << (8j);
return result;
}
/* return either 0 or a string explaining why no gliders for this rule */
char * findExcuse(rule r) {
if (r & (1 << 9)) return 0; /* B0 patterns are a weird special case */
else if (r & (1 << 10))
return "with B1, any pattern expands in all directions";
else if (!(r & ((1 << 11)  (1 << 12))))
return "without B2 or B3, pattern can't escape bounding box";
else if ((r & 017) == 017)
return "with S0123, trailing edge of pattern can not die";
/*
// More detailed explanation:
// There are two different cases, according to whether B2 or B3 is set.
//
// Case with B2:
// Let (x,y) be the position of the live cell minimizing x
// with ties broken by minimizing y among all live cells (x,y) minimizing x.
// (So (x,y) is the most extreme live cell in some orthogonal direction.)
// Then the only neighbors it has can be (x,y+1) (x+1,y1) (x+1,y) (x+1,y+1),
// and (x,y) can only die if all four of these are live.
// But in that case, a new point would be born at (x1,y).
// So the bounding box of the pattern can never shrink and it can't be a glider.
//
// Case with B3:
// Let (x,y) be the position of the live cell maximizing x+y
// with ties broken by minimizing x among all live cells (x,y) maximizing x+y.
// (So (x,y) is the most extreme live cell in some diagonal direction.)
// Then the only neighbors it has can be (x1,y) (x1,y1) (x,y1) (x+1,y1),
// and (x,y) can only die if all four of these are live.
// But in that case, a new point would be born at (x+1,y).
// So the bounding diamond of the pattern can never shrink and it can't be a glider.
*/
else if ((r & 014001) == 014001)
return "with B23/S0, trailing edge of pattern can not die";
/*
// In more detail:
// Let (x,y) be the live cell minimizing x; among such cells choose the minimum y.
// If the pattern is to move, there must be a phase at which all cells on columns
// x or lower die and no new ones are born.
// But if (x,y+1) is live, (x1,y) and (x1,y+1) will be born.
// If (x,y+2) is live, (x1,y+1) will be born.
// If (x+1,y) is live, the only way to prevent (x,y1) from being born would be for
// it to have four or more live neighbors, (x,y) (x+1,y) (x+1,y1) (x+1,y2);
// but then (x,y2) would be born since it has either two or three neighbors.
// If (x+1,y1) is live and (x+1,y) is dead, (x,y1) will be born.
// If (x+1,y+1) is live and (x+1,y) is dead, (x,y+1) will be born.
// So in all cases, if (x,y) has a live neighbor, a cell on column x or x1 is born.
// But if it has no live neighbors, it survives itself.
// So in no case can the bounding box shrink.
*/
else if ((r & 0176) == 0176)
return "with S123456, connected patterns can not shrink";
/*
// In more detail:
// Suppose a pattern has no two adjacent live cells in any phase; then it can
// not have three adjacent cells on the leading edge, so (with B3) can't grow.
// Nor can it have two adjacent cells on the leading diagonal, so (with B2) can't grow.
// On the other hand, suppose a pattern has two adjacent live cells; let (x,y)
// be the leftmost (smallest x) live cell with a live neighbor. If the pattern is
// to move, (x,y) must sometime stop being such a cell. It can't do so by dieing
// (it has too few neighbors) so instead all its neighbors must die. But if
// (x,y1) or (x,y+1) is a neighbor, it also stays alive. Otherwise, if (x+1,y)
// is a neighbor, it has at most six neighbors and also stays alive. Finally, if
// (x+1,y1) or (x+1,y+1) is a neighbor (and the previous cells aren't) it has
// at most six neighbors and stays alive.
//
// Note that there exist connected patterns in B34678/S12346 and B35678/S123457
// that die in two steps, so both S5 and S6 are essential in this argument
// unless we make further assumptions about which birth rules are set.
*/
else if ((r & 030076) == 030076)
return "with B34/S12345, connected patterns can not shrink";
/*
// In more detail:
// The same argument above applies to disconnected patterns, so again assume
// (x,y) is the leftmost live cell with a live neighbor. If more than one such cell
// exists, let (x,y) be the one with the smallest y coordinate. Again, note that
// (if all neighbors of (x,y) are to die) neither (x,y1) nor (x,y+1) can be live.
//
// CASE I: suppose that (x+1,y) is live. Then both of (x+1,y+1) or (x+1,y1)
// would also be live, or (x+1,y) would survive. To avoid a birth at (x,y1)
// (which already has three neighbors), the only possibility is that there are at
// least five neighbors; these can only be (x+1,y2) and (x1,y2), where (x1,y2)
// is an isolated point. But then we must have a birth at (x,y2) (since it has
// either three or four neighbors) and (x+1,y2) must survive (since it has no neighbors
// on row x). So again there would be a connected cell on row x.
//
// CASE II: (x+1,y) is dead. By symmetry, we can assume (x+1,y+1) is alive.
// Then if it is to die, it must have all five remaining neighbors; but then
// (x,y+1) would have four neighbors and would be born next to (x,y).
*/
else if ((r & 070036) == 070036)
return "with B345/S1234, connected patterns can not shrink";
/*
// In more detail:
// Let (x,y) be the connected live cell maximizing y, and among all such cells
// minimizing x. Then it has at most four neighbors, and survives; if in the
// next generation it again has a neighbor, the bounding box of connected cells
// can not shrink.
//
// CASE I: (x+1,y) is live. Then it has at most five neighbors, and to die
// must have all five; but then (x+1,y+1) has between three and five neighbors
// and is born next generation.
//
// CASE II: (x+1,y1) is live (or symmetrically (x1,y1). Then (x+1,y) has
// two dead neighbors shared with (x,y), and can't have all six remaining neighbors
// live because that would put a connected live cell in column y+1 contradicting
// the selection of (x,y). So if (x+1,y) is not to be born, (x,y1) and (x+2,y1)
// must be dead and (x+1,y1) survives.
//
// CASE III: The only remaining possible neighbor for (x,y) is (x,y1).
// But (if no previous case occurred) this has at most four neighbors and survives.
*/
else if ((r & 04374) == 0374)
return "with S234567 and without B2, can't escape bounding diamond without immortal triangle";
/*
// In more detail, let (x,y) be a point belonging to a triangle,
// minimizing x+y among all such points. Then in at least one of the triangles
// containing (x,y), all points have at most seven neighbors.
// So the bounding diamond of the points in triangles can not shrink.
// Note triangles or more general 2connected blocks are NOT immortal in B3/S23456:
// x = 15, y = 6, rule = B3/S23456
// obobo5bobobo$obobo5bobobo$2bobobobobobo$2bobob3obobo$4bob3obo$4bobobobo!
*/
else if ((r & 064077) == 0)
return "without one of B245/S012345, can't escape bounding diamond";
/*
// In more detail:
// Let cell x be two steps outside the bounding diamond D,
// and the first cell at this distance to become alive.
// Then in the previous generation, there must be a triangle
// of neighbors of x, two of which are one step outside D and one of which is in D
// (the remaining five neighbors of x are all two or more steps outside D).
// Before x is born, any cell outside D immediately dies, so the two outside
// neighbors of x must be newly born. Then the third neighbor must also be
// newly born, because two generations before x is born it wouldn't have enough
// neighbors to survive.
//
// But a simple case analysis shows that no such triangle can be born at once:
// there are only three remaining possibilities for the live neighbors of the
// two outside triangle vertices, and if these three possibilities are all live,
// the third vertex has four or five neighbors, too many for a birth.
*/
else if (fastDiag && (r & 04060) == 0)
return "diagonal speed limit is c/4 without one of B2/S45";
/*
// I got this proof (originally from JHC) via S. Silver.
// Consider the live cell maximizing x+y. To increase x+y in B3 rules,
// you have to have a triangle of three live cells. To increase it
// twice in a row, you need a W shape that will produce a triangle in
// the next generation. But without S4 or S5 the W's center cell will die.
// So a pattern that moves (a,b) units/period requires period >= 2a+2b.
*/
else if (fastDiag && (r & 04770) == 0770)
return "fast diagonal growth impossible without creating immortal cross";
/*
// As above, increasing x+y twice in a row requires a W shape. But
// the three central cells of the W plus the two new cells form a live region
// in which each cell has three or more live neighbors in the same region;
// none of these cells can ever die.
*/
else if (speedLimit && (r & 04036) == 0)
return "speed >= c/2 (or c/3 diagonal) impossible without one of B2/S1234";
/*
// Let (x,y) be a live cell maximizing x+2y, and (among these) having a larger value
// of y than any (x+2y)maximizer in any previous generation. Note that (with speed
// c/2 or c/3diag, B3 rules) max(x+2y) must increase by exactly one in each generation.
// Then (x,y) can only be born from a line of three live neighbors:
// (x1,y1), (x,y1), and (x+1,y1). If (x,y1) survived from the previous
// generation, then it had at most four neighbors (since it was a (x+2y)maximizer)
// and at least one neighbor (so (x+1,y1) could have been born), and the rule
// must have one of S1234. If (x,y1) was newly born, then (x+1,y1) must have come
// from a similar line of three neighbors (x,y2), (x+1,y2), (x+2,y2) and so on
// ad infinitum ad absurdum.
*/
else return 0;
}
#define Bgray(i) (reverse(gray(i))  (1 << 3))
#define minBit(i) ((i) &~ ((i)1))
/* show chart of known gliders  2nd arg zero for b3, nonzero for b2 */
#define RELEVANT(x) (((x) & 017000) == (twosies? 04000 : 010000))
#define RULETABSIZE (1<<14)
#define RULETABINDEX(x) ((((x)&0760000)>>4)  ((x)&0777))
void countGliders(char * dir, int twosies) {
int i, j, b;
struct Glider * g;
/* precompute table of numbers  much faster than scanning all gliders for all rules */
static short nGliders[RULETABSIZE];
for (i = 0; i < RULETABSIZE; i++) nGliders[i] = 0;
for (g = firstGlider; g != 0; g = g>next) {
if (!gliderMatch(dir, g)) continue;
i = g>ones;
if (!RELEVANT(i)) continue;
j = i  (~g>zeros & 0777777);
if (i == j) b = 1;
else b = minBit(g>ones ^ j);
while (i <= j) {
int idx = RULETABINDEX(i);
if ((g>ones &~ i) != 0) i += minBit(g>ones &~ i);
else if ((i &~ j) != 0) i += minBit(i &~ j);
else {
if (map_type == by_num) nGliders[idx]++;
else if (map_type == by_period && g>period > nGliders[idx]) nGliders[idx] = g>period;
else if (map_type == by_size) {
int x = g>x;
if (x < g>y) x = g>y;
if (nGliders[idx] <= 0  x < nGliders[idx]) nGliders[idx] = x;
} else if (map_type == by_vel && nGliders[idx] < 10) {
static struct Glider ** vels = 0;
int k;
int gg = gcd(gcd(g>dx,g>dy),g>period);
if (vels == 0) {
vels = malloc(RULETABSIZE*16*sizeof(struct Glider *));
if (vels == 0) {
printf("Unable to allocate velocity table!\n");
exit(0);
}
}
for (k = 0; k < nGliders[idx]; k++) {
struct Glider * q = vels[(idx<<4)+k];
int qg = gcd(gcd(q>dx,q>dy),q>period);
if (g>period/gg == q>period/qg &&
((g>dx/gg == q>dx/qg && g>dy/gg == q>dy/qg) 
(g>dx/gg == q>dy/qg && g>dy/gg == q>dx/qg)))
break;
}
if (k >= nGliders[idx]) {
vels[(idx<<4)+k] = g;
nGliders[idx]++;
}
}
i += b;
}
}
}
printf("\n ");
for (i = 0; i < 32; i++) printf(" B");
for (j = 3; j <= 8; j++) {
printf("\n ");
for (i = 0; i < 32; i++)
if (j == 3 && twosies) printf(" 2");
else if (Bgray(i) & (1 <<j)) printf(" %d", j);
else printf(" ");
}
printf("\n ");
for (i = 0; i < 32; i++) printf("");
for (j = 0; j <= 0777; j++) {
int gj = reverse(gray(j));
printf("\nS");
for (i = 0; i < 9; i++)
if(gj & (1 << i)) printf("%d", i); else printf(" ");
printf(" :");
for (i = 0; i < 32; i++) {
int idx;
rule r = (Bgray(i) << 9) + gj;
if (twosies) r ^= 014000;
idx = RULETABINDEX(r);
if (nGliders[idx] > 9) printf(" X");
else if (nGliders[idx] > 0) printf(" %d", nGliders[idx]);
else if (findExcuse(r) != 0)
printf(" ");
else printf(" .");
}
}
putchar('\n');
fflush(stdout);
exit(0);
}
/* output all known gliders */
void listGliders(char * dir) {
struct Glider * g;
int gn, n = 0;
for (g = firstGlider, gn=1; g != 0; g = g>next, gn++)
if (gliderMatch(dir, g)) {
if (n++) printf("\n");
printGlider(g, gn, g>ones);
}
if (n == 0) printf("No gliders are known.\n");
exit(0);
}
/* output gliders in symmetric rules */
int symRule(struct Glider * g)
{
rule r = 0;
int i;
for (i = 0; i < 9; i++) {
int b = 1 << (9+i);
int s = 1 << (8i);
if ((g>ones & b)  (g>zeros & s)) r = b;
else r = s;
}
if ((r & g>ones) != g>ones  (r & g>zeros)) return 0;
return r;
}
void listSym() {
struct Glider * g;
int gn, n = 0;
for (g = firstGlider, gn=1; g != 0; g = g>next, gn++)
if (symRule(g)) {
if (n++) printf("\n");
printGlider(g, gn, ~symRule(g));
}
exit(0);
}
void usage()
{
fprintf(stderr,"usage:\n");
fprintf(stderr," glider n to output the nth known glider\n");
fprintf(stderr," glider B3/S23 to list known gliders for those rules\n");
fprintf(stderr," glider string to list rules having gliders with matching speed and direction\n");
fprintf(stderr," glider @string to chart matching gliders for each rule with B2\n");
fprintf(stderr," glider #string to chart matching gliders for each rule with B3\n");
fprintf(stderr," glider + to list redundant gliders\n");
fprintf(stderr," glider * to list all gliders\n\n");
fprintf(stderr,"options for , @, and # (multiple options must be in the given order):\n");
fprintf(stderr," n to chart counts of the number of known gliders (the default)\n");
fprintf(stderr," p to chart the maximum known glider period\n");
fprintf(stderr," s to chart the minimum known glider size\n");
fprintf(stderr," MMc/NN to chart only gliders with the given speed\n");
fprintf(stderr," d to chart only gliders that move diagonally\n");
fprintf(stderr," k to chart only gliders that move at a knights move or other offslope\n");
fprintf(stderr," o to chart only gliders that move orthogonally\n");
exit(1);
}
rule parseRule(char *s) {
int shift = 1; /* flag for no shift seen yet */
rule r = 0;
while (*s != 0) {
switch(*s) {
case 'b': case 'B': shift = 9; break;
case 's': case 'S': shift = 0; break;
case '/': break;
case '0': case '1': case '2': case '3': case '4':
case '5': case '6': case '7': case '8': case '9':
if (shift < 0) nthGlider(atoi(s));
r = 1 << (shift + *s  '0');
break;
case '*':
if (shift < 0) {
if (*++s == '\0') listGliders(0);
else listGliders(s);
} else usage();
break;
case '#':
if (shift < 0) {
if (*++s == '\0') countGliders(0,0);
else countGliders(s,0);
} else usage();
break;
case '@':
if (shift < 0) {
if (*++s == '\0') countGliders(0,1);
else countGliders(s,1);
} else usage();
break;
case '+':
if (shift < 0 && *++s == '\0') redundant();
else usage();
break;
case 'x':
listSym();
case '':
if (shift < 0) {
if (*++s == '\0') listRules(0);
else listRules(s);
}
default: usage();
}
s++;
}
return r;
}
int nGliders = 0;
void testGlider(rule r, struct Glider * g, int gn) {
if ((g>ones &~ r) != 0  (g>zeros & r) != 0) return;
if (nGliders++ > 0) printf("\n");
printGlider(g,gn,r);
}
char * readString() {
static char buf[1024];
char *s = buf;
int i = 0;
char c;
fprintf(stderr,"Rule, number, or \'\': ");
while ((c = getchar()) != '\n')
if (i++ < 1023) *s++ = c;
*s++ = '\0';
return buf;
}
char lineBuf[MAX_GDB_LINE_LENGTH];
void badDB(char * arg) {
printf("Database file has bad format, glider %d: %s!\nLine:\n\n%s",
numGliders, arg, lineBuf);
exit(0);
}
void readGliderDB() {
FILE * f = fopen(GLIDERDB,"r");
if (ferror(f)) {
printf("Unable to open glider database!\n");
exit(0);
}
while (!feof(f) && !ferror(f) && fgets(lineBuf, MAX_GDB_LINE_LENGTH, f) != 0) {
char * s = lineBuf;
struct Glider * g;
int rl;
while (*s == ' ') s++;
if (*s == '\0'  *s == '\n'  *s == '#') continue;
/* make new glider */
g = malloc(sizeof(struct Glider));
if (g == 0) {
printf("Out of memory for glider %d!\n", ++numGliders);
exit(0);
}
if (firstGlider == 0) firstGlider = g;
else lastGlider>next = g;
lastGlider = g;
g>next = 0;
numGliders++;
/* read name */
rl = 0;
while (s[rl] != ':' && s[rl] != '\0') rl++;
if (rl == 0) g>name = 0;
else {
g>name = malloc(rl+1);
if (g>name == 0) {
fprintf(stderr,"No memory for glider: %s\n", s);
exit(0);
}
memcpy(g>name, s, rl);
g>name[rl] = '\0';
s += rl;
}
if (*s++ != ':') badDB("missing colon after name");
/* read discoverer */
rl = 0;
while (s[rl] != ':' && s[rl] != '\0') rl++;
if (rl == 0) g>disco = 0;
else {
g>disco = malloc(rl+1);
if (g>disco == 0) {
fprintf(stderr,"No memory for glider: %s\n", s);
exit(0);
}
memcpy(g>disco, s, rl);
g>disco[rl] = '\0';
s += rl;
}
while (*s != ':' && *s != '\0') s++; /* skip disco */
/* parse rules */
if (*s++ != ':') badDB("missing colon after discoverer");
if (*s++ != 'B') badDB("missing B in first rule");
g>ones = 0;
while (*s >= '0' && *s <= '8') g>ones = 1 << (9 + *s++  '0');
if (*s++ != '/') badDB("missing slash in first rule");
if (*s++ != 'S') badDB("missing S in first rule");
while (*s >= '0' && *s <= '8') g>ones = 1 << (*s++  '0');
g>zeros = 0777777;
if (*s++ != ':') badDB("missing colon after first rule");
if (*s++ != 'B') badDB("missing B in second rule");
while (*s >= '0' && *s <= '8') g>zeros &=~ (1 << (9 + *s++  '0'));
if (*s++ != '/') badDB("missing slash in second rule");
if (*s++ != 'S') badDB("missing S in second rule");
while (*s >= '0' && *s <= '8') g>zeros &=~ (1 << (*s++  '0'));
if ((g>zeros & g>ones) != 0) badDB("first rule is not subset of second");
/* parse period and other numbers */
if (*s++ != ':') badDB("missing colon after rules");
g>period = 0;
while (*s >= '0' && *s <= '9')
g>period = g>period * 10 + *s++  '0';
if (*s == '/') {
s++;
while (*s >= '0' && *s <= '9') s++;
g>halfPeriod = 1;
} else g>halfPeriod = 0;
if (*s++ != ':') badDB("missing colon after period");
g>dx = 0;
if (*s == '') s++; /* ignore sign */
while (*s >= '0' && *s <= '9')
g>dx = g>dx * 10 + *s++  '0';
if (*s++ != ':') badDB("missing colon after dx");
g>dy = 0;
if (*s == '') s++; /* ignore sign */
while (*s >= '0' && *s <= '9')
g>dy = g>dy * 10 + *s++  '0';
if (*s++ != ':') badDB("missing colon after dy");
g>x = 0;
while (*s >= '0' && *s <= '9')
g>x = g>x * 10 + *s++  '0';
if (*s++ != ':') badDB("missing colon after x");
g>y = 0;
while (*s >= '0' && *s <= '9')
g>y = g>y * 10 + *s++  '0';
/* parse RLE and copy into safe place */
if (*s++ != ':') badDB("missing colon after y");
rl = 0;
while (s[rl] != '!' && s[rl] != '\0') rl++;
if (s[rl] != '!') badDB("missing excl at end of rle");
g>rle = malloc(rl+2);
if (g>rle == 0) {
printf("Out of memory for glider %d data!\n", numGliders);
exit(0);
}
memcpy(g>rle, s, rl+1);
g>rle[rl+1] = '\0';
}
}
int main(int ac, char **av) {
char * arg;
struct Glider * g;
rule r;
int gn;
if (ac < 2) arg = readString();
else if (ac == 2) arg = av[1];
else usage();
readGliderDB();
r = parseRule(arg);
if ((r & 01400) == 01400) { /* B0 and S8? */
rule rr = r;
int i;
r = 0;
for (i = 0; i < 18; i++)
if ((rr & (1 << i)) == 0) r = (1 << (17i));
printRule(rr);
printf(" is a disguised form of ");
printRule(r);
printf(".\n\n");
}
for (g = firstGlider,gn=1; g != 0; g = g>next,gn++)
testGlider(r,g,gn);
if (nGliders == 0) {
char * s = findExcuse(r);
if (s == 0) printf("No gliders are known.\n");
else printf("No gliders can exist: %s.\n", s);
}
return 0;
}
Re: Thread for basic questions
How did the Life enthusiasts find the components of SL synthesising?
I think it may work in B2n3/S23q, too.
The only components we have is 1G ones, e. g.
I think it may work in B2n3/S23q, too.
The only components we have is 1G ones, e. g.
Code: Select all
x = 9, y = 4, rule = B2n3/S23q
2o4b2o$o5bobo$bo4bo$2o!
 Moosey
 Posts: 3286
 Joined: January 27th, 2019, 5:54 pm
 Location: A house, or perhaps the OCA board. Or [click to not expand]
 Contact:
Re: Thread for basic questions
I think we look at how huge sls are made from smaller SLs in soups
I am a prolific creator of many rather pathetic googological functions
My CA rules can be found here
Also, the tree game
Bill Watterson once wrote: "How do soldiers killing each other solve the world's problems?"
My CA rules can be found here
Also, the tree game
Bill Watterson once wrote: "How do soldiers killing each other solve the world's problems?"
The China Labyrinth problem
The China Labyrinth problem asks for a pattern consisting of 64 hexagons, any one of which has a unique neighbourhood configuration. A provided solution is:
In other words, the above pattern is able to identify the survival conditions of a 2state range1 cellular automaton on a hexagonal grid. Neglecting births, run it by one generation and we can check whether the rule is totalistic, isotropic or not.
So naturally we consider analogies for other grids, other neighbourhoods and other ranges...
(I'm not sure if a dedicated thread is worthwhile, and feel free to move out of this thread if it is)
Code: Select all
x = 14, y = 15, rule = B/S0123456H
4bo$4b4o$3b5o$4b2ob2o$5bob4o$5bo5bo$o2b3o5bo$b3o$b2obo4b2o2bo$bob3o3b
5o$2b2obo4b2obo$3b4o3bo$5bobob3obo$6bo$7b2o!
#C [[ GRID THUMBNAIL THUMBSIZE 3 ]]
So naturally we consider analogies for other grids, other neighbourhoods and other ranges...
(I'm not sure if a dedicated thread is worthwhile, and feel free to move out of this thread if it is)
Lifewiki: User:GUYTU6J

Someone please find a use for this:

Someone please find a use for this:
Code: Select all
x = 9, y = 7, rule = B3/S23
6bo$6bobo$5bo2bo$b2o3b2o$o2bo$bobo$2bo!
#C [[ COLOR BACKGROUND 255 200 82 COLOR ALIVE 81 143 51 ]]
Re: The China Labyrinth problem
For previous discussion on this topic a good keyword to search for is endemic. There is a short thread on this general topic from half a year ago.GUYTU6J wrote: ↑February 2nd, 2020, 2:47 amThe China Labyrinth problem asks for a pattern consisting of 64 hexagons, any one of which has a unique neighbourhood configuration. A provided solution is:In other words, the above pattern is able to identify the survival conditions of a 2state range1 cellular automaton on a hexagonal grid. Neglecting births, run it by one generation and we can check whether the rule is totalistic, isotropic or not.Code: Select all
x = 14, y = 15, rule = B/S0123456H
4bo$4b4o$3b5o$4b2ob2o$5bob4o$5bo5bo$o2b3o5bo$b3o$b2obo4b2o2bo$bob3o3b
5o$2b2obo4b2obo$3b4o3bo$5bobob3obo$6bo$7b2o!
#C [[ GRID THUMBNAIL THUMBSIZE 3 ]]
So naturally we consider analogies for other grids, other neighbourhoods and other ranges...
(I'm not sure if a dedicated thread is worthwhile, and feel free to move out of this thread if it is)
Re: Thread for basic questions
How can you support your own rule inside Lifeviewer?
Re: Thread for basic questions
Your rule needs to be in the LifeWiki Rule namespace. I added your recent rule here.
LifeViewer https://lazyslug.com/lifeview
Re: Thread for basic questions
What's the growth rate?
Code: Select all
x = 7, y = 9, rule = B2n3aikq4iq/S2i3a4i
2b3o$2bobo$2bo2b2o$3bo2bo$4b3o$3bo$2bo$obo$3o!
#C [[ GRAPH ]]
Code: Select all
x = 7, y = 9, rule = B2n3aikq4ceiz6c/S2i3a4i
2b3o$2bobo$2bo2b2o$3bo2bo$4b3o$3bo$2bo$obo$3o!
#C [[ GRAPH ]]
Lifewiki: User:GUYTU6J

Someone please find a use for this:

Someone please find a use for this:
Code: Select all
x = 9, y = 7, rule = B3/S23
6bo$6bobo$5bo2bo$b2o3b2o$o2bo$bobo$2bo!
#C [[ COLOR BACKGROUND 255 200 82 COLOR ALIVE 81 143 51 ]]
Re: Thread for basic questions
For the first pattern, it is linear, but oscillates in a fractalish way with each cycle having twice (?) the period of the previous. For the second, the growth rate is asymptotically quadratic.GUYTU6J wrote: ↑February 5th, 2020, 1:37 amWhat's the growth rate?Code: Select all
x = 7, y = 9, rule = B2n3aikq4iq/S2i3a4i 2b3o$2bobo$2bo2b2o$3bo2bo$4b3o$3bo$2bo$obo$3o! #C [[ GRAPH ]]
Code: Select all
x = 7, y = 9, rule = B2n3aikq4ceiz6c/S2i3a4i 2b3o$2bobo$2bo2b2o$3bo2bo$4b3o$3bo$2bo$obo$3o! #C [[ GRAPH ]]
Re: Thread for basic questions
I am new to this Conway's Game of Life so I don't know what things are called. I can't find a pattern like this in the wiki, probably because I don't know the search terms. It is a diagonal line with 3 small steps, 1 big step, 4 small steps, 1 big step, repeating. It evaporates into gliders in both directions perpendicular to the line. I assume it is well known and I just want to know what it's called.
Code: Select all
x = 89, y = 73, rule = B3/S23
88bo$86b2o$85bo$84bo$83bo$82bo$80b2o$79bo$78bo$77bo$75b2o$74bo$73bo$
72bo$71bo$69b2o$68bo$67bo$66bo$64b2o$63bo$62bo$61bo$60bo$58b2o$57bo$
56bo$55bo$53b2o$52bo$51bo$50bo$49bo$47b2o$46bo$45bo$44bo$42b2o$41bo$
40bo$39bo$38bo$36b2o$35bo$34bo$33bo$31b2o$30bo$29bo$28bo$27bo$25b2o$
24bo$23bo$22bo$20b2o$19bo$18bo$17bo$16bo$14b2o$13bo$12bo$11bo$9b2o$8bo
$7bo$6bo$5bo$3b2o$2bo$bo$o!
Re: Thread for basic questions
Pretty sure that would be considered a pure glider generator, you're out of luck for getting it classed as a notable pattern though since interest in those ceased very early on in the 70s
Bored of using the Moore neighbourhood for everything? Introducing the Range2 von Neumann isotropic nontotalistic rulespace!
Re: Thread for basic questions
Thanks. I don't imagine it's novel anyway, I just saw it when I scratched a diagonal line in golly so it's unthinkable that it hasn't been seen before. Wondered what it was called is all. No repetition so it's really only as good as drawing a bunch of gliders manually.
Re: Thread for basic questions
How to design an incremental synthesis for complicated objects like 7×9 eater?
Partially related, is there any circumstance where 7×9 eater works but this synthesizable variant doesn't?
Partially related, is there any circumstance where 7×9 eater works but this synthesizable variant doesn't?
Lifewiki: User:GUYTU6J

Someone please find a use for this:

Someone please find a use for this:
Code: Select all
x = 9, y = 7, rule = B3/S23
6bo$6bobo$5bo2bo$b2o3b2o$o2bo$bobo$2bo!
#C [[ COLOR BACKGROUND 255 200 82 COLOR ALIVE 81 143 51 ]]
Re: Thread for basic questions
What software is similar to dr but supports INT rules?
Similarly, how to find fizzles?
Similarly, how to find fizzles?
Re: Thread for basic questions
Can a p4 with one cell period 4 rotor exist
My favourite oscillator of all time
Code: Select all
x = 15, y = 13, rule = B3/S23
7bo2$3b2o5b2o$b2o4bo4b2o$5b2ob2o$bobo7bobo$bo2bobobobo2bo$5obobob5o$o
4bo3bo4bo$b3obobobob3o$3bob2obo2bo$8bobo$8b2o!