Difference between revisions of "Cellular automaton"
m (format=ref) 
(→Selfreplicating configurations) 

Line 92:  Line 92:  
Subsequent to the von Neumann's cellular automaton new cellular automata have been produced capable of selfreplication and universal computation with fewer states and using the same (von Neumann) neighborhood. Results include [[#Codd_1968Codd (1968)]] with 8 states, [[#Banks_1971Banks (1971)]] with 4 states and [[#Serizawa_1987Serizawa (1987)]] with 3 states. As of 2017, Serizawa's CA appears to be the simplest (in terms of neighborhood size×number of states) cellular automaton known to have a nontrivial replicator.  Subsequent to the von Neumann's cellular automaton new cellular automata have been produced capable of selfreplication and universal computation with fewer states and using the same (von Neumann) neighborhood. Results include [[#Codd_1968Codd (1968)]] with 8 states, [[#Banks_1971Banks (1971)]] with 4 states and [[#Serizawa_1987Serizawa (1987)]] with 3 states. As of 2017, Serizawa's CA appears to be the simplest (in terms of neighborhood size×number of states) cellular automaton known to have a nontrivial replicator.  
−  [[#Langton_1984Langton (1984)]] constructed a cellular automaton and a replicator. His cellular automaton is a simplification of Codd's. However, Langton's CA was not intended to support universal computation. The simplicity of the configuration is possible because of a novel method of selfreplication. The replicator consists of a loop with circulating cell states that encode instructions to construct a new arm, then turn 90° and repeat until a new loop is formed. The new loop is then filled with the same circulating information and the connection between it and the loop that generated it is severed. The parent loop continues to build copies until no more space is available, then it becomes a still life. Later variants of the loop added construction capabilities to it, and the most advanced versions granted it properties akin to a living organism, including a finite "lifespan"  +  [[#Langton_1984Langton (1984)]] constructed a cellular automaton and a replicator. His cellular automaton is a simplification of Codd's. However, Langton's CA was not intended to support universal computation. The simplicity of the configuration is possible because of a novel method of selfreplication. The replicator consists of a loop with circulating cell states that encode instructions to construct a new arm, then turn 90° and repeat until a new loop is formed. The new loop is then filled with the same circulating information and the connection between it and the loop that generated it is severed. The parent loop continues to build copies until no more space is available, then it becomes a still life. Later variants of the loop added construction capabilities to it, and the most advanced versions granted it properties akin to a living organism, including a finite "lifespan", a approximationss of evolution via natural selection, and sexual reproduction. 
[[#Nehaniv_2002Nehaniv (2002)]] presented a method that allows the transformation of conventional (synchronous) cellular automata to an equivalent asynchronous cellular automata (a case not covered by our definition above). In the same paper, a selfreproducing configuration is presented which is based on the described procedure applied to Langton's CA.  [[#Nehaniv_2002Nehaniv (2002)]] presented a method that allows the transformation of conventional (synchronous) cellular automata to an equivalent asynchronous cellular automata (a case not covered by our definition above). In the same paper, a selfreproducing configuration is presented which is based on the described procedure applied to Langton's CA. 
Revision as of 00:00, 16 August 2019
Cellular automata (CA) are a certain class of mathematical objects of which Conway's Game of Life is an example.
Informally, a cellular automaton consists of:
 A space of cells.
 A set of allowed states for each cell. An assignment of an state to every cell is called a “configuration” or “pattern” (the first term is more common in mathematical discussion and the later in informal discussions).
 A neighbourhood which defines which cells are considered to pass information to a given cell.
 A transition rule which specifies how given a cell and the states of its neighbours, a new state is produced.
The state of the cellular automaton evolves in discrete time, with the state of each cell at time t+1 being determined by the state of its neighbourhood at time t in accordance with the transition rule.
There are some variations on the above definition. It is common to require that there be a quiescent state (i.e., a state such that if the whole universe is in that state at generation 0 then it will remain so in generation 1). In Conway's Game of Life, the "OFF" state is quiescent, but the "ON" state is not. Other variations allow spaces other than ℤ^{n}, neighbourhoods that vary over space and/or time, probabilistic or other nondeterministic transition rules, and so on.
One approach of the study of cellular automata focus on properties that are common to all or many (most often infinitely many) cellular automata, without regard to specific examples. Another approach studies a single or a small finite set of cellular automata for which an explicit description is given.
Contents
Formal definition
Let us denote the set of integers by ℤ and the length of any tuple x by x. For any tuples of integers x and y such that x=y we denote their elementwise addition by x+y.
A cellular automaton is a tuple (ℤ^{n},S,N,f) such that the dimension n is at least 1, the set of states S is finite, the neighbourhood N is a tuple of elements of ℤ^{n} and f:S^{N}→S is the transition function.
A configuration of the cellular automaton (ℤ^{n},S,N,f) is any function ℤ^{n}→S.
The global transition function F of the cellular automaton (ℤ^{n},S,N,f) is a function from configurations to configurations F:(ℤ^{n}→S)→(ℤ^{n}→S) such that for any configuration c and element a∈ℤ^{n} we have F(c)(a)=f(a+N).
Let c be a configuration. When the cellular automata is clear from the context, then by c^{n} where n is a nonnegative integer we denote the configuration F^{n}(c) where F is the corresponding global transition function.
Let c and c′ be configurations, then we say that c′ is a translation of c if there exist an a∈ℤ^{n} such that for any x∈ℤ^{n} it holds that c′(a+x)=c(x). We say that the translation is proper if the condition holds for some ntuple whose elements are not all 0.
For any configuration c, if there exists a n≥1 such that c^{n} = c we call c an oscillator. If c is an oscillator and n is the least positive integer such that c^{n} = c then we call n the period of c. If c is an oscillator with period 1 then we call c a still life. If c is an oscillator and is not a still life we call c a proper oscillator.
A glider is a configuration c such that c^{n} is a proper translation of c for some n>0.
Our definition of cellular automaton is a simple derivative of the one given in Codd (1968). The only difference in scope is that Codd only allows grids of dimension 2 and requires the presence of a quiescent state, that is, a state v_{0} such that f(v_{0},...,v_{0})=v_{0}. Moreover, Codd only allows configurations in which finitely many cells are nonquiescent, while our definition of configuration allows any assignment of states to cells.
Common dimensions and neighborhoods
In the approach that studies a small set of automata which are explicitly described the most common space is by far ℤ^{2}. This space can be easily represented in a computer screen or in print, is easy to manipulate, and geometric intuition is applicable. Some explicitly described cellular automata on ℤ^{1} and ℤ^{3} have also been studied. A disadvantage of ℤ^{1} is that information transfer requires many path crossings. In ℤ^{3} path crossings can be entirely avoided, but is harder to represent than ℤ^{1} and ℤ^{2}. The most common neighbourhoods of CA in ℤ^{2} are shown below.

For each dimension n≥1 and radius r≥0 we define the corresponding neighbourhoods:
 The generalized von Neumann neighbourhood is the set {x∈ℤ^{n}(MAX_{0≤i≤n1}x_{i})<r}.
 The generalized Moore neighbourhood is the set {x∈ℤ^{n}(Σ_{0≤i≤n1}x_{i})<r}.
 The Euclidean neighbourhood is the set {x∈ℤ^{n}(√Σ_{0≤i≤n1}x_{i}^{2})<r}.
See Gallery of neighbourhoods illustrations of some instances in ℤ^{2}.
The third proper regular tiling of twodimensional space, the triangular tiling,^{[1]} has been investigated; it can be simulated on the square grid using 4 states that divide each cell into two right triangles.^{[2]} It can be divided into two major neighbourhoods, the triangular Moore neighbourhood and triangular von Neumann neighbourhood.
Threedimensional rules use the cubic honeycomb, which gives rise to many potential neighbourhoods, such as the cubic Moore and cubic Von Neumann neighbourhoods, among others.
Fourdimensional rules most commonly use the tesseractic honeycomb (with a tesseractic Moore and tesseractic von Neumann neighbourhood). While fourdimensional space also admits the 16cell honeycomb and 24cell honeycomb, these do not seem to have been used as of yet.
Irregular tesselations, such as the Cairo pentagonal tesselation, have been investigated.
Generalizations and topological characterization
Our definition is enough to describe most of the cellular automata in which explicitly described configurations are studied. In particular it handles as expected the elementary cellular automata, CA on the Euclidean square tessellation (including all lifelike CA and all nontotalistic lifelike CA) and the Euclidean hexagonal tessellation. Furthermore, CA on the Euclidean triangular tessellation can be handled when proper care is taken. However, there exist objects which are cellular automata according to our informal description, but can not be defined as such in our formal definition. An example is cellular automata in hyperbolic tessellations (Margenstern, 2013). A very general definition of cellular automata is given in Moriceau (2011) and a further generalization is given in Wacker (2016). Interestingly, Wacker's definition uses amenable groups. Both amenable groups and cellular automata were introduced by the same man: John von Neumann.
A remarkable result, the CurtisHedlundLyndonRichardson (CHLR) theorem, relates cellular automata theory with topology and dynamical system theory. An informal statement is given as follows: Let the set of states be given the discrete topology and the configuration space be given the Tikhonov topology; then the global transition functions of the cellular automata over the configuration space are exactly those functions which are continuous and commute with the translations of the cellular space. In particular, the CHLR theorem holds for our definition of CA. Informally we state that the CHLR theorem holds for definitions of CA where the set of states is required to be finite, but if the set of states is allowed to be infinite, the set of allowable neighborhoods must be expanded or a further constraint must be imposed on continuous functions so that an analogous result holds (CeccheriniSilberstein 2010; Sobottka 2015). Generally when a novel definition of cellular automaton is presented a corresponding version of the CHLR theorem is proved in the same treatise.
The CHLR theorem was demonstrated independently by Hedlund (1969) (in this paper credit is given to Curtis and Lyndon in addition to the author) and Richardson (1972). Neither of these papers use the term “cellular automaton”. Nonetheless the systems they study are, respectively, 2dimensional deterministic cellular automata and ndimensional nondeterministic cellular automata.
Block cellular automata
In the above definitions of cellular automata, the transition function takes the state of a set of possibly many cells and gives the next state for a single cell. Block cellular automata (BCA) use an alternative approach. In a BCA each configuration is augmented with a partition of the sets of cells into subsets of of finite size. Call this partition p(c) for any configuration c. The local transition function takes the state of all the cells in an element of p(c) and generates a new state for all those cells, instead of only for a single cell. The partitioning of a configuration c needs not be the same as c_{1}. If that was the case, the state of one cell could never affect the state of any cell outside its partition. However, the partitioning must be independent of the states of cells. In the context of BCA the partitioning scheme is called the neighborhood.
The motivation to study block cellular is the ease with which reversible global transition functions can be generated. The local transition rule of a BCA is injective if and only if it is bijective. Any bijective local transition function generates a bijective global transition function. All block cellular automata can be transformed into equivalent classical cellular automata at the expense of adding more states or expanding the neighborhood.
The most commonly studied partition is the Margolous neighborhood. This partitioning scheme is defined for ℤ^{2}. The partition is a grid of blocks of cells of size 2×2. The blocks are shifted one cell vertically and horizontally after each time step; therefore the partition repeats with period 2. In other words, given a configuration c, the cell space is partitioned along the greenblue lines to compute c_{n+1} from c_{n} for even n and along the red lines to compute c_{n+1} from c_{n} for odd n.
Selfreplicating configurations
Informally, a configuration that creates a copy of itself after some number of generations is called a replicator.
John von Neumann investigated the possibility of building a selfreplicating machine. He originally considered a mechanical approach, but decided that this was too hard to control. With the help of Stanislaw Ulam, he designed a new mathematical abstraction, the cellular automaton, in order to create a replicator. His CA was made in the late 1940s and is complex. It operates on the Von Neumann neighbourhood (a cell and its four orthogonally connected neighbours), and has 29 states. It is described in von Neumann, Burks (1966).
Subsequent to the von Neumann's cellular automaton new cellular automata have been produced capable of selfreplication and universal computation with fewer states and using the same (von Neumann) neighborhood. Results include Codd (1968) with 8 states, Banks (1971) with 4 states and Serizawa (1987) with 3 states. As of 2017, Serizawa's CA appears to be the simplest (in terms of neighborhood size×number of states) cellular automaton known to have a nontrivial replicator.
Langton (1984) constructed a cellular automaton and a replicator. His cellular automaton is a simplification of Codd's. However, Langton's CA was not intended to support universal computation. The simplicity of the configuration is possible because of a novel method of selfreplication. The replicator consists of a loop with circulating cell states that encode instructions to construct a new arm, then turn 90° and repeat until a new loop is formed. The new loop is then filled with the same circulating information and the connection between it and the loop that generated it is severed. The parent loop continues to build copies until no more space is available, then it becomes a still life. Later variants of the loop added construction capabilities to it, and the most advanced versions granted it properties akin to a living organism, including a finite "lifespan", a approximationss of evolution via natural selection, and sexual reproduction.
Nehaniv (2002) presented a method that allows the transformation of conventional (synchronous) cellular automata to an equivalent asynchronous cellular automata (a case not covered by our definition above). In the same paper, a selfreproducing configuration is presented which is based on the described procedure applied to Langton's CA.
Conway's Game of Life is known to be universal, with 2 states and the Moore neighbourhood. Conway did not design Life for this purpose, unlike von Neumann's, Codd's, Banks' and Serizawa's rules, but he did deliberately choose a set of rules known to exhibit sufficiently complex behavior that selfreplication was likely to be possible. In other words, when the rules of Life were first chosen, it was not a foregone conclusion that replicators would be constructible  but it can't be said that the existence of replicators in the rule is purely coincidental.
The Spartan universal computerconstructor could replicate, given a sufficient program tape. The Gemini spaceship constructs a complete copy of its own circuitry, but is not considered to be a replicator because its instruction tape is never duplicated. Between 2010 and 2017 much more efficient construction mechanisms have been developed that can be used for selfreplication, but to date only a limited onedimensional example has actually been completed (the linear propagator).
Formal definition
There are several possible nonequivalent definitions of selfreplicators. Moore (1962) proposed a simple definition which does not attempt to exclude trivial cases (although Moore wrote “selfreproduction”, we assume that it synonymous with “selfreplication”). However, his definitions of selfreplicator is limited to the same cellular automata and configurations allowed by the definition of Codd (1968). Our definition is a slight generalization of Moore's definition to cover all the configurations allowed by our definition.
Not all of the selfreplicators mentioned above meet our formal definition. Langton's selfreplicating loop and the classical HighLife replicator meet our definition. Typically, a configuration does not meet our definition if each copy generates only one "child" copy of itself, and does not return to its initial state after finishing construction of the child copy.
A slight complication not covered below is the case of a highperiod replicator pattern that creates its child copies in a different phase from the parent. For example, a replicator may contain oscillating components such as a moving "tape" of gliders for information storage. Parent and child copies of the configuration may not match exactly at any given time  but a future state of the child copy will precisely match the current state of the parent copy, and vice versa.
It seems reasonable to consider such parent/child pairs to be valid copies of each other for the purposes of the definitions below, even if they are not phasematched. In most cases it can be shown that after a sufficient number of replication cycles have passed, an arbitrarily large number of phasematched descendants of a parent pattern will inevitably be present.
Definition: Let (ℤ^{n},S,N,f) be a cellular automaton. Let c be a configuration such that for some s∈S the set X={a∈ℤ^{n}c(a)≠s} is finite. We say that c is a finite configuration, s is a background state of c and X is a support of c.
Theorem: Let c be a finite configuration, then there is a unique background state and support of c.
 Let v and v′ be background states of c. Let X be the set of all cells a such that c(a)≠v and respectively for X′ and v′. The set ℤ^{n}\(X∪X′) is nonempty because ℤ^{n} is infinite and X∪X′ is finite. Let x∈ℤ^{n}\(X∪X′). By the properties of set union and complement we have x∈ℤ^{n}\X and x∈ℤ^{n}\X′; by definition of X and X′ we have x=v and x=v′; therefore v=v′. Again from the definition of X and X′ it follows that X=X′.
Definition: Let c be a finite configuration. We write bg(c) for the background state of c and we write su(c) for the support of c.
Definition: Let c and c′ be finite configurations such that bg(c)=bg(c′). If su(c)∩su(c′)=∅ we say that c is disjoint from c′. If su(c)⊂su(c′) and for all a∈su(c) we have c(a)=c′(a) then we say that c′ contains c.
Definition: Let c and c′ be configurations. We say that c′ contains at least n copies if c if there exist a set X of pairwise disjoint translations of c and for each x∈X, c contains x.
Definition: A configuration c is called a selfreplicator if for any n≥1 there exist a t≥0 such that c_{t} contains at least n disjoint copies of c.
Definition: Let c and c be a configuration. Let n≥0 be an integer. If c′ contains at least n copies of c and for any integer k>n it is not the case that c′ contains at least k copies of c then we say that c′ contains exactly n copies of c.
Lifelike cellular automata
 Also see: Totalistic Lifelike cellular automaton
A cellular automaton is said to be Lifelike if it meets the following four criteria:
 It has two dimensions (i.e., n=2).
 It has two states, usually called OFF and ON (i.e., S=2).
 The neighbourhood used is the Moore neighbourhood.
 The new state of a cell in the next generation can be expressed as a function of the number of cells in its neighbourhood that are in the ON state and the cell's own state; that is, the rule is outer totalistic (also called semitotalistic).
This class of cellular automata is named for Conway's Game of Life, the most famous cellular automaton, which Lifelike cellular automata mimic. Many different terms are used to describe this class of cellular automata; it is also common to refer to it as the "Life family" or to simply use phrases like "similar to Life".
Rules
Rules are typically expressed as rulestrings in B/S notation, with two lists of numbers giving the live neighbour counts that cause a dead cell to be born or a live cell to survive, respectively; Conway's Game of Life has the rulestring B3/S23.
There are 262144 (= 2^{18}) distinct Lifelike rules. Each rule has a complementary rule which behaves identically under onoff reversal; namely the rule in which birth occurs on all N except those for which 8N is a survival condition in the original rule, and survival occurs on all N except those for which 8N is a birth condition in the original rule. For example, the rule complementary to Conway's Life is 01234678/0123478. This however does not quite halve the number of effectively distinct rules, as there are 512 (= 2^{9}) selfcomplementary rules which are unaffected by onoff reversal.
Some straightforward inferences on the behavior of different kinds of rules can be made:
 In all rules where the lowest birth condition is 1 neighboring ON cell, all finite patterns grow at the speed of light in all directions. No still lifes, oscillators or spaceships are possible in these rules. Several have replicators, however. There are 65536 (= 2^{16}) rules of the B1 type.
 All rules where the lowest birth condition is 2 neighboring ON cells are exploding or expanding in character; this is largely due to the fact that a domino at the corner of a pattern will give rise to a new domino, also located at the corner of the daughter pattern. Spaceships (such as the moon) and oscillators (such as the duoplet) do exist in many of these rules. There are 32768 (= 2^{15}) rules of the B2 type.
 All rules where the lowest birth condition (if any) is 4 or more neighboring ON cells are stable in character, since no patterns ever grow beyond their initial bounding box. In particular, no spaceships can exist. There are 16384 (= 2^{14}) rules of the B4+ type.
 In all rules where the lowest birth condition is 0 neighboring ON cells, and the highest survival condition is 8 neighboring ON cells, the vacuum is unstable and will be immediately filled (and remain filled) with ON cells; thus, there are no patterns that remain finite. All of these rules have distinct complementary rules, and they are not commonly studied on their own.
 This leaves 16384 rules in which the lowest birth condition is 3 neighboring ON cells, as well as 65536 rules in which the lowest birth condition is 0 neighboring cells, and 8 neighbors is not a survival condition. All chaotic rules must fall in either of these two areas of the rulespace. Most wellstudied examples fall in the first one, since for long no commonly available software existed that could simulate the evolution of rules containing B0. Golly's QuickLife algorithm simulates them by converting them into equivalent rules to avoid having to simulate an infinite number of cells.^{[3]}
Generalizations
 Main articles: Nontotalistic Lifelike cellular automaton, Nonisotropic Lifelike cellular automaton, Generations, Larger than Life
Various generalizations of Lifelike cellular automata are possible. In nontotalistic (but isotropic) rules, the transition function considers not just the number of cells in a given cell's neighborhood but also their relative alignment; for example, a cell might be born if bordered by three live cells in a row, but not by three live cells in other configurations. Nontotalistic rules are described using Hensel notation, an extension of B/S notation additionally describing allowed or forbidden configurations.
In nonisotropic rules, the transition function additionally considers the absolute placement of a given cell's neighborhood; for example, a cell might be born if it is bordered by two live neighbors on the north and northeast, but not if it is bordered by two live neighbors on the south and southwest. Nonisotropic rules are described using MAP strings, a notation unrelated to B/S notation.
In Generations rules, additional states are introduced, and cells that do not survive into the next generation instead progress through the subsequent states before dying. Cells in these additional states do not count as live neighbors for the purpose of evolution.
In Larger than Life rules, the size of a cell's neighborhood is extended to include cells with a distance greater than one. As in Generations rules, nonsurviving cells may decay through additional states instead of dying outright.
Wellknown lifelike cellular automata
 Main article: List of Lifelike cellular automata
The following table lists lifelike cellular automata that are particularly wellknown or wellstudied.
Rulestring  Name  Description 

B1357/S1357  Replicator  A rule in which every pattern is a replicator. 
B1357/S02468  Fredkin  A rule in which, like Replicator, every pattern is a replicator. 
B2/S  Seeds  An exploding rule in which every cell dies in every generation. It has many simple orthogonal spaceships, though it is in general difficult to create patterns that don't explode. 
B2/S0  Live Free or Die  An exploding rule in which only cells with no neighbors survive. It has many spaceships, puffers, and oscillators, some of infinitely extensible size and period. 
B3/S012345678  Life without death  An expanding rule that produces complex flakes. It also has important ladder patterns. 
B3/S12  Flock  A rule which rapidly decays into small still lifes and oscillators. 
B3/S1234  Mazectric  An expanding rule that crystalizes to form mazelike designs that tend to be straighter (ie. have longer "halls") than the standard maze rule. 
B3/S12345  Maze  An expanding rule that crystalizes to form mazelike designs. 
B3/S23  Conway's Life  A chaotic rule that is by far the most wellknown and wellstudied. It exhibits highly complex behavior. 
B36/S125  2x2  A chaotic rule with many simple still lifes, oscillators and spaceships. Its name comes from the fact that it sends patterns made up of 2x2 blocks to patterns made up of 2x2 blocks. 
B36/S23  HighLife  A chaotic rule very similar to Conway's Life that is of interest because it has a simple replicator. 
B368/S245  Move  A rule in which random patterns tend to stabilize extremely quickly. Has a very common slowmoving spaceship and slowmoving puffer. 
B3678/34678  Day & Night  A stable rule that is symmetric under onoff reversal. Many patterns exhibiting highly complex behavior have been found for it. 
B37/S23  DryLife  An explosive rule that resembles the regular Game of Life, but the weighted spaceships do not function, and there exists 9c/28 orthogonal technology. 
B38/S23  Pedestrian Life  A chaotic rule that strongly resembles regular Life, with many exciting natural technologies. 
References
 ↑ Brian Prentice. Re: Thread for basic questions (discussion thread) at the ConwayLife.com forums
 ↑ Tim Hutton (June 28, 2015). "The Rules". Golly Rule Table Repository. Retrieved on August 30, 2017.
 ↑ QuickLife at Golly's online help
Books and articles
 Banks, E. R. (1971) Information processing and transmission in cellular automata.
 CeccheriniSilberstein, T.; Coornaert, M. (2010) Cellular Automata and Groups. DOI: 10.1007/9783642140341. ISBN: 9783642140334, 9783642140341.
 Codd, E. F. (1968) Cellular Automata. No ISBN. WorldCat OCLC number: 637978742.
 Hedlund, G. A. (1969) Endomorphisms and Automorphisms of the Shift Dynamical System. DOI: 10.1007/BF01691062.
 Langton, C. G. (1984) Selfreproduction in cellular automata. DOI: 10.1016/01672789(84)902562.
 Margenstern, M. (2013) Small Universal Cellular Automata in Hyperbolic Spaces: A Collection of Jewels.
 Moore, E. F. (1962) Machine models of selfreproduction in Mathematical Problems in the Biological Sciences. DOI: 10.1090/psapm/014/9961.
 Moriceau, S. (2011) Cellular automata on a Gset. arXiv: 1105.5335 [math.DS].
 Nehaniv, C. E. (2002) SelfReproduction in Asynchronous Cellular Automata in Proceedings 2002 NASA/DoD Conference on Evolvable Hardware. DOI: 10.1109/eh.2002.1029854.
 Richardson, D. (1972) Tessellation with Local Transformations. DOI: 10.1016/S00220000(72)800096.
 Serizawa, T. (1987) ThreeState Neighbor Cellular Automata Capable of Constructing SelfReproducing Machines. DOI: 10.1002/scj.4690180404.
 Sobottka, M.; Gonçalves, D. (2015) A note on the definition of siding block codes and the CurtisHedlundLyndon Theorem. arXiv: 1507.02180 [math.DS].
 von Neumann, J.; Burks, A. W. (1966) Theory of SelfReproducing Automata. No ISBN. WorldCat OCLC number: 7298386.
 Wacker, S. (2016) Cellular Automata on Group Sets and the Uniform CurtisHedlundLyndon Theorem. DOI: 10.1007/9783319393001_15. In Cellular Automata and Discrete Complex Systems. AUTOMATA 2016.
External links
 Cellular automaton at Wikipedia
 Cellular automata rules lexicon at Mirek Wójtowicz's Cellebration page
 Cellular automaton at the Life Lexicon
 Cellular Automaton at Wolfram Mathworld
 Totalistic Cellular Automaton at Wolfram Mathworld
 Golly Rule Table Repository