All the things I build are based around these "double crosses" circuits.

Code: Select all

`x = 54, y = 6, rule = 34-ik5e/2ace/3`

2.A4.A4.A4.A4.A4.A4.A4.A4.A4.A4.A$4A2.3A2.3A2.3A2.3A2.3A2.3A2.3A2.3A

2.3A2.3A$2.A4.A4.A4.A4.A4.A4.A4.A4.A4.A4.A$2.A4.A4.A4.A4.A4.A4.A4.A4.

A4.A4.A$.3A2.3A2.3A2.3A2.3A2.3A2.3A2.3A2.3A2.3A2.3A$2.A4.A4.A4.A4.A4.

A4.A4.A4.A4.A4.A!

They have two sides which is sometimes inconvenient when merging different circuits, I have found some solutions to this problem but sadly they cause a slight delay

Code: Select all

`x = 97, y = 70, rule = 34-ik5e/2ace/3`

3$11.B.B.B2.B2.2B3.2B.3B4.B.B.2B2.3B$10.B2.B.B.B.B.B.B.B3.2B4.B2.B.B.

B.2B$10.B2.3B.3B.B.B.B.B.B6.B.B.B.B.B$11.B.B.B.B.B.B.B2.2B.3B3.B2.B.

2B2.3B5$11.A4.A4.A$10.3A2.3A2.3A$11.A4.A4.A3.A$11.A4.A4.A2.3A$9.4A2.

3A2.3A2.A3.A$11.A4.A4.A3.A2.3A$24.3A2.A$25.A3$25.A4.A4.A4.A$24.3A2.3A

2.3A2.3A$25.A4.A4.A4.A$25.A4.A4.A4.A$24.3A2.3A2.3A2.3A$25.A4.A4.A4.A

16$5.B.B2.2B.2B3.B2.B4.3B.3B.2B3.2B.3B.2B$4.B2.B.B3.B.B.B.B.B4.3B.2B

2.B.B.B3.2B2.B.B$5.B.B.B.B.B.B.3B.B4.B.B.B3.2B2.B.B.B3.2B$4.B2.B2.2B.

B.B.B.B.3B2.B.B.3B.B.B2.2B.3B.B.B5$25.BA$26.A4.A4.A4.A4.A4.A$25.3A2.

3A2.3A2.3A2.3A2.3A$26.A4.A4.A4.A4.A4.A$26.A4.A4.A4.A9.A$25.3A2.3A2.3A

2.3A2.A4.3A5.A$26.A4.A4.A4.A2.3A4.A5.3A$45.A12.A2$51.A$50.3A$51.A$2.B

A$3.A4.A4.A4.A4.A4.A4.A4.A4.A4.A4.A4.A4.A4.A4.A4.A4.A4.A4.A$2.3A2.3A

2.3A2.3A2.3A2.3A2.3A2.3A2.3A2.3A2.3A2.3A2.3A2.3A2.3A2.3A2.3A2.3A2.3A$

3.A4.A4.A4.A4.A4.A4.A4.A4.A4.A4.A4.A4.A4.A4.A4.A4.A4.A4.A$3.A4.A4.A4.

A4.A4.A4.A4.A4.A4.A4.A4.A4.A4.A4.A4.A4.A4.A4.A$2.3A2.3A2.3A2.3A2.3A2.

3A2.3A2.3A2.3A2.3A2.3A2.3A2.3A2.3A2.3A2.3A2.3A2.3A2.3A$3.A4.A4.A4.A4.

A4.A4.A4.A4.A4.A4.A4.A4.A4.A4.A4.A4.A4.A4.A!

Code: Select all

`x = 78, y = 41, rule = 34-ik5e/2ace/3`

2$2.B.B2.2B.2B3.B2.B7.B.2B2.B3.B.3B.3B.3B.2B$.B2.B.B3.B.B.B.B.B6.B2.B

.B.B3.B2.B3.B2.2B2.B.B$2.B.B.B.B.B.B.3B.B7.B.2B2.B3.B2.B3.B2.B3.2B$.B

2.B2.2B.B.B.B.B.3B4.B2.B3.3B.B2.B3.B2.3B.B.B12$35.A4.A4.A4.A4.A4.A4.A

4.A4.A$34.3A2.3A2.3A2.3A2.3A2.3A2.3A2.3A2.3A$31.A3.A4.A4.A4.A4.A4.A4.

A4.A4.A$11.BA17.3A2.A4.A4.A4.A4.A4.A4.A4.A4.A$12.A4.A4.A4.A3.A2.3A2.

3A2.3A2.3A2.3A2.3A2.3A2.3A2.3A$11.3A2.3A2.3A2.3A6.A4.A4.A4.A4.A4.A4.A

4.A4.A$12.A4.A4.A4.A$12.A4.A9.A$11.3A2.3A2.A4.3A6.A4.A4.A$12.A4.A2.3A

4.A3.A2.3A2.3A2.3A$21.A8.3A2.A4.A4.A3.A$31.A3.A4.A4.A2.3A$34.3A2.3A2.

3A2.A3.A$35.A4.A4.A3.A2.3A$48.3A2.A$49.A3$49.A4.A4.A4.A4.A$48.3A2.3A

2.3A2.3A2.3A$49.A4.A4.A4.A4.A$49.A4.A4.A4.A4.A$48.3A2.3A2.3A2.3A2.3A$

49.A4.A4.A4.A4.A!

Also a diode (also causes delay)

Code: Select all

`x = 61, y = 27, rule = 34-ik5e/2ace/3`

5$12.2B2.B.3B.2B2.3B$12.B.B.B.B.B.B.B.2B$12.B.B.B.B.B.B.B.B$12.2B2.B.

3B.2B2.3B7$38.A$37.3A$38.A2$5.A4.A4.A4.A4.A4.A4.A4.A4.A4.A4.A$3.4A2.

3A2.3A2.3A2.3A2.3A2.3A2.3A2.3A2.3A2.4A$5.A4.A4.A4.A4.A4.A4.A4.A4.A4.A

4.A$5.A4.A4.A4.A4.A4.A4.A4.A4.A4.A4.A$4.3A2.3A2.3A2.3A2.3A2.3A2.3A2.

3A2.3A2.3A2.3A$5.A4.A4.A4.A4.A4.A4.A4.A4.A4.A4.A!

Now for the FUN part, here's an AND gate, built taking advantage of signal-to-photon conversion.

Notice that the two inputs are on different sides of the circuits, by combining the previous pattern and tediously adjusting the gate (making it uglier and asymmetric) you could have both inputs properly on the same side.

Code: Select all

`x = 78, y = 67, rule = 34-ik5e/2ace/3`

30.A4.A$29.3A2.3A$2.A4.A4.A4.A4.A4.A2.A4.A$4A2.3A2.3A2.3A2.3A2.3A$2.A

4.A4.A4.A4.A4.A$2.A4.A4.A4.A4.A4.A$.3A2.3A2.3A2.3A2.3A2.3A$2.A4.A4.A

4.A4.A4.A3$30.A2.A$29.6A$30.A2.A12.A4.A4.A4.A4.A4.A4.A$30.A2.A11.3A2.

3A2.3A2.3A2.3A2.3A2.3A$29.6A11.A4.A4.A4.A4.A4.A4.A$30.A2.A12.A4.A4.A

4.A4.A4.A4.A$45.3A2.3A2.3A2.3A2.3A2.3A2.3A$46.A4.A4.A4.A4.A4.A4.A$2.A

4.A4.A4.A4.A4.A$.3A2.3A2.3A2.3A2.3A2.3A$2.A4.A4.A4.A4.A4.A$2.A4.A4.A

4.A4.A4.A$4A2.3A2.3A2.3A2.3A2.3A$2.A4.A4.A4.A4.A4.A2.A4.A$29.3A2.3A$

30.A4.A16$30.A4.A$29.3A2.3A$2.A4.A4.A4.A4.A4.A2.A4.A$4A2.3A2.3A2.3A2.

3A2.3A$2.A4.A4.A4.A4.A4.A$2.A4.A4.A4.A4.A4.A$.3A2.3A2.3A2.3A2.3A2.3A$

2.A4.A4.A4.A4.A4.A3$30.A2.A$29.6A$30.A2.A12.A4.A4.A4.A4.A4.A4.A$30.A

2.A11.3A2.3A2.3A2.3A2.3A2.3A2.3A$29.6A11.A4.A4.A4.A4.A4.A4.A$30.A2.A

12.A4.A4.A4.A4.A4.A4.A$45.3A2.3A2.3A2.3A2.3A2.3A2.3A$46.A4.A4.A4.A4.A

4.A4.A$2.A4.A4.A4.A4.A4.A$.3A2.3A2.3A2.3A2.3A2.3A$2.A4.A4.A4.A4.A4.A$

2.A4.A4.A4.A4.A4.A$.3A2.3A2.3A2.3A2.3A2.3A$2.A4.A4.A4.A4.A4.A2.A4.A$

29.3A2.3A$30.A4.A!

And here's an awful, artificial XOR gate:

Code: Select all

`x = 188, y = 102, rule = 34-ik5e/2ace/3`

18.A$17.3A$18.A$20.A$19.3A$20.A$22.A$21.3A$22.A$24.A$23.3A$24.A52.A

15.A$26.A49.3A13.3A$25.3A49.A15.A$26.A$28.A$27.3A61.A4.A2.A$28.A18.A

42.3A2.6A$30.A15.3A42.A4.A2.A$29.3A15.A$30.A2$27.A4.A4.A4.A4.A$26.3A

2.3A2.3A2.3A2.3A42.A4.A2.A$23.A3.A4.A4.A4.A4.A42.3A2.6A$4.A17.3A2.A4.

A4.A4.A4.A43.A4.A2.A$4.A4.A4.A4.A3.A2.3A2.3A2.3A2.3A2.3A$3.3A2.3A2.3A

2.3A6.A4.A4.A4.A4.A$4.A4.A4.A4.A$4.A4.A9.A$3.3A2.3A2.A4.3A6.A4.A4.A$

4.A4.A2.3A4.A3.A2.3A2.3A2.3A$13.A8.3A2.A4.A4.A3.A$23.A3.A4.A4.A2.3A$

26.3A2.3A2.3A2.A3.A$27.A4.A4.A3.A2.3A$40.3A2.A$41.A$59.A4.A$58.3A2.3A

$41.A4.A4.A4.A2.A4.A$40.3A2.3A2.3A2.3A$41.A4.A4.A4.A$41.A4.A4.A4.A$

40.3A2.3A2.3A2.3A$41.A4.A4.A4.A$75.A4.A2.A$74.3A2.6A$59.A2.A12.A4.A2.

A$58.6A$59.A2.A$59.A2.A$58.6A$59.A2.A12.A4.A2.A$74.3A2.6A$75.A4.A2.A$

41.A4.A4.A4.A$40.3A2.3A2.3A2.3A$41.A4.A4.A4.A$41.A4.A4.A4.A$40.3A2.3A

2.3A2.3A$41.A4.A4.A4.A2.A4.A$58.3A2.3A$59.A4.A$41.A$40.3A2.A$27.A4.A

4.A3.A2.3A$26.3A2.3A2.3A2.A3.A$23.A3.A4.A4.A2.3A$13.A8.3A2.A4.A4.A3.A

$4.A4.A2.3A4.A3.A2.3A2.3A2.3A$3.3A2.3A2.A4.3A6.A4.A4.A$4.A4.A9.A$4.A

4.A4.A4.A$3.3A2.3A2.3A2.3A6.A4.A4.A4.A4.A$4.A4.A4.A4.A3.A2.3A2.3A2.3A

2.3A2.3A$4.A17.3A2.A4.A4.A4.A4.A$23.A3.A4.A4.A4.A4.A$26.3A2.3A2.3A2.

3A2.3A$27.A4.A4.A4.A4.A43.A4.A4.A4.A4.A4.A4.A4.A4.A4.A4.A4.A4.A4.A4.A

4.A4.A4.A4.A4.A$90.3A2.3A2.3A2.3A2.3A2.3A2.3A2.3A2.3A2.3A2.3A2.3A2.3A

2.3A2.3A2.3A2.3A2.3A2.3A2.3A$30.A60.A4.A4.A4.A4.A4.A4.A4.A4.A4.A4.A4.

A4.A4.A4.A4.A4.A4.A4.A4.A$29.3A15.A43.A4.A4.A4.A4.A4.A4.A4.A4.A4.A4.A

4.A4.A4.A4.A4.A4.A4.A4.A4.A$30.A15.3A41.3A2.3A2.3A2.3A2.3A2.3A2.3A2.

3A2.3A2.3A2.3A2.3A2.3A2.3A2.3A2.3A2.3A2.3A2.3A2.3A$28.A18.A43.A4.A4.A

4.A4.A4.A4.A4.A4.A4.A4.A4.A4.A4.A4.A4.A4.A4.A4.A4.A$27.3A$28.A$26.A$

25.3A49.A$26.A49.3A$24.A52.A$23.3A$24.A$22.A$21.3A$22.A$20.A$19.3A$

20.A$18.A$17.3A$18.A!

NOT gates are difficult to time, but I'm pretty sure they can be done...